Hi there all. My name is Regina and live in Holland with my boyfriend Etienne. We just bought a rsm 250 (used) with an aquamedic chiller, deltec mc500 and 2 tunze 6055 with the tidal controller.
After a month of fiddling around restoring and cleaning the tank we're finally testing the tank with fresh water.
Stumbled into some cooling issues because the chiller is in the cupboard underneath the tank. But hopefully we solved the problem.
The deltec pump is jumping around like a mad man, the rotor seems to be out of balance.
So this week it is internet time, see if we can find the spare parts.
So far so good. Will post some pics from start untill today.
Love to see a seperate rsm forum, saves me from searching all the other forums [emoji6]
Window cracked on the inside
Fixed the crack with two small glass plates
Fixing water damage
The hose between the pump and chiller and ofcourse the returning hose. Original fitting was to big so we solved it like this.
Found a great spot
Besides the original powerunit we installed a second one because the deltec and tunze pumps didn't fit
Solved the heating issue for the chiller
So far so good. Now some further testing and then salt water ???
And start reading this topic.
[emoji106]
Verzonden vanaf mijn iPad met Tapatalk
After a month of fiddling around restoring and cleaning the tank we're finally testing the tank with fresh water.
Stumbled into some cooling issues because the chiller is in the cupboard underneath the tank. But hopefully we solved the problem.
The deltec pump is jumping around like a mad man, the rotor seems to be out of balance.
So this week it is internet time, see if we can find the spare parts.
So far so good. Will post some pics from start untill today.
Love to see a seperate rsm forum, saves me from searching all the other forums [emoji6]
Window cracked on the inside
Fixed the crack with two small glass plates
Fixing water damage
The hose between the pump and chiller and ofcourse the returning hose. Original fitting was to big so we solved it like this.
Found a great spot
Besides the original powerunit we installed a second one because the deltec and tunze pumps didn't fit
Solved the heating issue for the chiller
So far so good. Now some further testing and then salt water ???
And start reading this topic.
[emoji106]
Verzonden vanaf mijn iPad met Tapatalk