Built347
Has been struck by the ban stick
OK.. then just add a piece of 3/4" plywood cut to the size of the bottom glass on top of the 2x10..you could even cut this in 2 pieces if your needed to to get into the stand if it didn't fit whole.... in tank construction the side glass is glued ontop of the bottom glass.. so as long as you have even support accross the bottom glass you can lift it/support it by that..
.
.
.!!!!! When supporting the tank by the bottom glass be SURE!! THE WOOD IS CLEAN.. one small object that wont crush under pressure will shatter the bottom glass....
Sent from my BatPhone using Tapatalk
.
.
.!!!!! When supporting the tank by the bottom glass be SURE!! THE WOOD IS CLEAN.. one small object that wont crush under pressure will shatter the bottom glass....
Sent from my BatPhone using Tapatalk