RDrink25's New 130D

RDrink25

RDrink25

Member
Latest test anything I can do to improve? I am doing weekly 10% water changes.

10/13
amm .0
ph 8.4
temp 78
sal .026
rate 50
rite .0
phos .61
mag 1440
cal 440
alk 3.26
 
RDrink25

RDrink25

Member
Here is an updated pic starting to look alot better

IMG_0454.jpg
 
RDrink25

RDrink25

Member
Update... Keeping a tank is hard at times and can get very frustrating! As of now the tank is back on track I started to over dose a while back and over feed. There is also a new addition to the tank. Here are my water paramaters I see my CAL high what are some ways to get it down along with other things I may be doing not right. Thx for the input.

2/18
amm .1
ph 8.3
temp 78
sal .026
phos .22 ppb
rite .1
rate .2
cal 593
alk 4.22

photo7-1.jpg


photo6.jpg
 
RDrink25

RDrink25

Member
Some updated pics. Been playing around with the camera which of the 2 pics look better with or without flash? Also am I missing anything does the tank look like it needs anything?

No Flash
IMG_2267.jpg


Flash
IMG_2271.jpg


IMG_2275.jpg


IMG_2276.jpg


IMG_2277.jpg
 
goma

goma

Well-Known Member
RS STAFF
PREMIUM
RDrink25 said:
Thx I do too but it is hard to take pics of a tank any ideas?
Click to expand...

You shot at 1/30 second f/3.5 and ISO 320. With your Canon T2i you can set it to AV mode, increase your ISO to 1800 or so, set the lowest aperture you can and you'll get a much faster shutter speed.
 
RDrink25

RDrink25

Member
goma said:
You shot at 1/30 second f/3.5 and ISO 320. With your Canon T2i you can set it to AV mode, increase your ISO to 1800 or so, set the lowest aperture you can and you'll get a much faster shutter speed.
Click to expand...

Thx for the tip I will try it tomorrow when the lights come on!
 
RDrink25

RDrink25

Member
Thanks its getting there. It is starting to be a bit of work I use a toothbrush to remove any of the unwanted GSP.
 
You must log in or register to reply here.
Top