desertcelt
New Member
Looking for some advice on placing my two MP10 Vortech pumps in my 105 gal rimless. Just swapped out the drive board for a failed one in my old ES to a new OD driver.
Due to my recent aquascape change I believe I have some deadspots that are attracting some algae and cyano. Want to place the pumps for maximum coverage without creating a "windy" tank environment. Currently I have two pumps on opposite sides of the tank in a master/slave relationship, but thinking about moving both to the same side to try to get a elongated circular flow pattern that would pull detritus off the sand bed an up to the surface where it could get to the overflow.
Any suggestions on placement of these two pumps?
Thanks
Due to my recent aquascape change I believe I have some deadspots that are attracting some algae and cyano. Want to place the pumps for maximum coverage without creating a "windy" tank environment. Currently I have two pumps on opposite sides of the tank in a master/slave relationship, but thinking about moving both to the same side to try to get a elongated circular flow pattern that would pull detritus off the sand bed an up to the surface where it could get to the overflow.
Any suggestions on placement of these two pumps?
Thanks