Ok so the next installment.
Today after a lot of faffing about by a retarded delivery guy I received my latest bit of tech for my tank,
A single Aquaray 600 in marine blue, it has 3 blue LEDs and 2 white ones.
Here is how it came with the brackets which I then cut down to look a lot neater.
Here I have cut the bracket to size then drilled the mounting hole slightly bigger to allow for the original rsm hood lense screws to pass through it
Here it is in its place now the other side and on with the led unit.
Looks great and a tidy install, nice and sturdy does block a small amount of one of the t5 lamps but I don't see it as a real issue.
Now time to power it up and program it in my profilux
Here is my led 1 interface I got from a british reefer on the sales section of ultimate reef, unfortunately most of the equipment on RS is in the states so no help to me so I had to defect to the dark side to get this haha.
Here is the back of my profilux, getting pretty damn full behind there!! Still need to install more simu spots and a L port expansion and splitter, 1more level controller and my Vortech controller whenever that decides to show up!
Just testing if the light is working in the lighting scenario section
My god it does!!!L
And here's my lighting overview, the new led isn't going to be on for long and it will have a dimming process of 2 hours then stay on 100% for I think 4 hours then dim down again.
Hope this helps anybody thinking of doing this out in some way