Ok, did a small water test today and it had a very small *drip* *drip* *drip* from one of the bottom seams. :smck: I drained it out, dryed it out, and ran another bead of Weld-on #4 and it's sealing/drying now. I did order some Weld-on #16 to run along every seam just to fill everything in. After I do that, I'll run another water test.
I also made the first version of the drip box today and I wanted to try my hand at heating/folding the acrylic. Wasn't pretty but it did work.
I think I figured out how to heat/fold the acrylic to make perfectly square edges now though so I'm going to try it again tomorrow on some scrap pieces.
I also got one of my side braces/light holders put together. I still need to cut the notches and cut out the braces/connectors for the light(s).
Over all, I'm really happy with everything and I'm confident that it will withstand the pressure of up to 50g of water.