BRS Deluxe reactor on RSM250

[Danreef]

For a return, I just drilled a round big hole in the back plastic over the media rack. 5 minutes to generate the needed hole

Here it is :

 

[mike1970]

Here is how I run my return and outlet for my BRS reactor. To the right is the out from the pump and to the left is the clean water out

 

[prestofish]

Mike, I got all my stuff yesterday to attempt to get this setup going. Unfortunately the male part that threads into the Sicce pump is exactly the same size as the 1/2" RO tubing from BRS. Did you have to get a special coupler to connect the two, or somehow modify the line to fit on/in the provided inlet? TIA

 

[mike1970]

Hmmm oh remember now get a small piece of 3/4" silicone tubing to join them

 

[funkoid]

@mike1970 with not having a sump, how do you protect against flooding your room running pipe work out into the GFO reactor? Do you not have a return pump?

 

[mike1970]

its a closed looped system with a pump in the media chamber and the outlet on the left side of the tank