Hi guys,
I am currently rethinking my setup in terms of pump configuration. I switched the stock circulation pump to one with much less power, that is why I installed two TUNZE 6015 Nanostream. One is (looking from the front) at the upper right corner close to the surface skimmer which directs at the back plate to have a flow behind my reef. The second one is on the upper left corner (close to the back too) and pointing to the middle of the front glass. Both are on 24/7. I have the feeling that this is maybe to much of flow, maybe the one at the upper left corner would be sufficient. My reef is not touching the back, so water can always flow around. On the other hand, the 6015 is the smallest flow pump and should not make too much hassle. Am I overthinking?
Alex
I am currently rethinking my setup in terms of pump configuration. I switched the stock circulation pump to one with much less power, that is why I installed two TUNZE 6015 Nanostream. One is (looking from the front) at the upper right corner close to the surface skimmer which directs at the back plate to have a flow behind my reef. The second one is on the upper left corner (close to the back too) and pointing to the middle of the front glass. Both are on 24/7. I have the feeling that this is maybe to much of flow, maybe the one at the upper left corner would be sufficient. My reef is not touching the back, so water can always flow around. On the other hand, the 6015 is the smallest flow pump and should not make too much hassle. Am I overthinking?
Alex