zchauvin
Active Member
I am using the Red Sea coral pro salt. Took all tests on newly made batch -
Kh - 12.8
Ph - 8.33
Calcium - 480
Magnesium - 1370
This is at a conductivity of 35ppt
I have been using this for my water changes for the last 15g of water. My tank was originally filled using store water made with fritz.
These are tank parameters at end of cycle before doing anything at all.
Ph - 7.75 day, 7.68 night
Conductivity 34.7-35.1
Calcium - 440
Magnesium - 1100
With replacing +- 80% total volume with this water AND using Kalk at 1/2 tsp per gallon I have not been able to get my ph to go above 8.10. It has gotten there and will sit at or around the 7.95 range and then drop back off to 7.70.
My current tank parameters are -
Ph - 7.93
Kh - 10.7
Conductivity - 34.9
Temp - 77.9
Magnesium - 1500
Calcium - 500
I am using Kalk +2 in my ATO.
I used all fake rock for aquascape.
Stock is -
Hammer
Symphyllia Wilsoni
Two acans
Lobo
Two acro frags
Bubble
I'm at a loss.
Sent from my iPhone using Tapatalk
Kh - 12.8
Ph - 8.33
Calcium - 480
Magnesium - 1370
This is at a conductivity of 35ppt
I have been using this for my water changes for the last 15g of water. My tank was originally filled using store water made with fritz.
These are tank parameters at end of cycle before doing anything at all.
Ph - 7.75 day, 7.68 night
Conductivity 34.7-35.1
Calcium - 440
Magnesium - 1100
With replacing +- 80% total volume with this water AND using Kalk at 1/2 tsp per gallon I have not been able to get my ph to go above 8.10. It has gotten there and will sit at or around the 7.95 range and then drop back off to 7.70.
My current tank parameters are -
Ph - 7.93
Kh - 10.7
Conductivity - 34.9
Temp - 77.9
Magnesium - 1500
Calcium - 500
I am using Kalk +2 in my ATO.
I used all fake rock for aquascape.
Stock is -
Hammer
Symphyllia Wilsoni
Two acans
Lobo
Two acro frags
Bubble
I'm at a loss.
Sent from my iPhone using Tapatalk