Hi,
Looking for some assistance with settings for my AI Sol's being controlled by the profilux. I have setup the profilux to recognise the light units via the rs232 connector and I have all 3 channels setup on three different illumination schedules to control each of the 3 different coloured leds on the units. These are all fine and working as required but I am trying to setup on of the channels to also act as the moonlight. I have setup a separate timing schedule for moonlight but don't see how to have that channel setup for moonlight and also for the normal lighting schedule.
Also, since I have three AI's, is it possible to set up so the come on separately. For example having the left hand unit come on first, then middle then right hand side and then do the same going off so that it will mimic a sunrise and a sunset by the light rising on one side of the tank and setting on the other?
All help much appreciated.
Regards,
David
Looking for some assistance with settings for my AI Sol's being controlled by the profilux. I have setup the profilux to recognise the light units via the rs232 connector and I have all 3 channels setup on three different illumination schedules to control each of the 3 different coloured leds on the units. These are all fine and working as required but I am trying to setup on of the channels to also act as the moonlight. I have setup a separate timing schedule for moonlight but don't see how to have that channel setup for moonlight and also for the normal lighting schedule.
Also, since I have three AI's, is it possible to set up so the come on separately. For example having the left hand unit come on first, then middle then right hand side and then do the same going off so that it will mimic a sunrise and a sunset by the light rising on one side of the tank and setting on the other?
All help much appreciated.
Regards,
David