ToeSloth
Member
I ordered this from Steve's LED's and wanted to show what I did to fit it into my hood. I'm sure it can be done other ways as well. Maybe even wire it into the existing system and timer.
I slipped the power and remote sensor through the fan slots for the area for a third fan. The power adapter is sitting in that area as well because it wouldn't fit under the timer which was my first thought. I had planned on putting some holes in to route the power but it just didn't seem to work with the existing length on the cabling provided.
I loom forward to playing with the lights later tonight. I have it set on my Apex to come on right before my main lights go out and off right after the mains come on around noon.
I plan on fitting in some LED fixture soon. Probably AI's Hydra or Radion Gen2 so these probably won't stat this way long.
Best,
Chris
I slipped the power and remote sensor through the fan slots for the area for a third fan. The power adapter is sitting in that area as well because it wouldn't fit under the timer which was my first thought. I had planned on putting some holes in to route the power but it just didn't seem to work with the existing length on the cabling provided.
I loom forward to playing with the lights later tonight. I have it set on my Apex to come on right before my main lights go out and off right after the mains come on around noon.
I plan on fitting in some LED fixture soon. Probably AI's Hydra or Radion Gen2 so these probably won't stat this way long.
Best,
Chris