RSM 250 micro bubbles/chiller

[ksicard]

Hello all,
I had two questions about my RSM 250 that I needed advice with.

1.) The skimmer is producing lots of tiny micro bubbles that are bouncing around in the display. I'm not sure how to fix the issue and I was looking for advice on how to correct it. I have the stock sponge placed correctly and even have some DLS filter floss sitting in the chamber that I have my purigen in. The purigen sits on top of the DLS to keep it weighted down. My water level is always kept between the top and 3rd lines on the side of tank. Can anyone provide some relief on the matter?

2.) I have a chiller that I want to set-up, is there any manuals on how to hook it up with my accessory kit for the RSM 250? Do I need a particular type of pump or will any mag drive do the trick?

Thank you in advance,
Kyle S.

 

[Danreef]

Skimmer: From my thread


I have also set-up the skimmer. It is working like a charm. NO ISSUES SO FAR !!!!... I have read so many about the issues that people have that I was scare of this guy. I followed Red Sea suggestions on this thread (see pictures on thread) :

http://www.reefcentral.com/forums/sh....php?t=2140082

Also added and air valve to fine tune the income air to the skimmer. The skimmer valve was difficult to use. I took the idea from another member, see my pictures. The income air is out of the tank too.


CHILLER: Same posting on my thread

I have added the CHILLER ........I took out pump #2 and replaced it with the Eheim 3000 compact at max speed. The pump circulate the water in the chiller and returns it to the tank.

For pictures see posting below
http://www.reefsanctuary.com/forums...niels-tank-upgrade-rsm-250-a.html#post1253484

Cheers
Daniel

PS: today I ordered the JBJ 1/4 Chiller from BRS taking advantage of a 15% discount. Decided to upgrade the 1/10 to the 1/4. The 1/10 is working but I wanted the 1/4 with a more powerful compressor and will keep the 1/10 as backup.