Tory Larsen
New Member
Update to my little aquarium, all the parameters have been good and stable, I added in a few corals, two Zoas and one Duncan I believe (correct me if I’m wrong) also added in two small ocellaris clowns, they are so cool to watch!
Also I made some mods to the top of the tank, I removed the hood and bought a back filter chamber cover from intank, I had to modify it however because it wasn’t quite tall enough so the skimmer collection cup was touching it before it actually was able to rest on the rim. Nothing a 3D printer spacer couldn’t fix. Then I also switched to Current USA Orbit LED to obtain better colors and reduce heat that I was getting with the T5 lights with the hood. This has helped a ton in keep the temps stable and not as high as they were before. Everything is doing great.
Let me know if you guys have any tips or suggestions!
Also I made some mods to the top of the tank, I removed the hood and bought a back filter chamber cover from intank, I had to modify it however because it wasn’t quite tall enough so the skimmer collection cup was touching it before it actually was able to rest on the rim. Nothing a 3D printer spacer couldn’t fix. Then I also switched to Current USA Orbit LED to obtain better colors and reduce heat that I was getting with the T5 lights with the hood. This has helped a ton in keep the temps stable and not as high as they were before. Everything is doing great.
Let me know if you guys have any tips or suggestions!