jbj stock filter help

S

saltlife305gio

Member
hello reefers i have a jbj nano cube 28g hqi everything stock even the filter system i have a 3 stage filter media basket ,from top to bottom filter floss, second chemi pure ,and ceramic rings, with a oceanic biocube uv sterilizer 5 watt, i wanna do like a intank refugeum ,just need guidancefrom some one who has done it . my setup has been running for a lil over a year now just wanna upgrade plz help will up date pics ive posted this same question and after 60 views no response ): can someone plz helpcnfzd:cnfzd:cnfzd:cnfzd:cnfzd:cnfzd:cnfzd:cnfzd:cnfzd:
 
W

Woody

New Member
Here is a thread which may be beneficial to your question.

http://www.reefsanctuary.com/forums...gium-center-chamber-nano-cube-hqi-28-gal.html

If your just looking to add a replace a chemical section with a refugium section this is the directions listed for the JBJ Nano-Glo as seen at the marine depot website JBJ Nano-Glo 4-LED Magnetic Refugium Light

"Filter Basket Layout
First Chamber – Place a small ball of Chaetomorpha algae which should fill up half the chamber. This will provide room for growth.

Second Chamber – Place the activated carbon bag to help remove dissolved organic compounds. Replace monthly as odor and discoloration of the water can occur.

Third Chamber – Place the mechanical sponge to prevent any loose strands of the Chaetomorpha algae (spaghetti algae) from entering the pump column. This will also help trap particulate matter and free floating debris.

Lighting the Refugium
Since pH and oxygen levels generally drop once the main tank lights are turned off, we suggest running the NANO-GLO on a reverse daylight cycle. This simply means to have a timer turn on the NANO-GLO LEDs once the main tank lights are turned off. The NANO-GLO should be turned off prior to the main tank lights turning on again."

I think that there are probably several other methods.
 
You must log in or register to reply here.
Top