no plans, the most of the price was the return pump and the over flow,
i used the cs90 and the mag pump, that was the bulk
its a 10gal tank, cost 12 bucks
1'1/2 flex pipe from the hardware store (less the 5$)
the glass i had cut for less then 20 bucks i think it was 8 cant remmember
no plans, just looked at a few sumps to see how i wanted the baffels to go wether it was under over or over under,
i went under over over under.
i have marks on the right side on the glass to mark high and low water,
i have a line for max hight b4 in the event of power outage overflow sump
and a line for lowest b4 micro bubble main tank
i would recommend trying, its eazy i did it for altogether 200 give or take
you dont have to be under it, you can be to the side or below
i learned alot about water thur this project.
the next house, and my real tank will be plumed thu out the house,
sump will be down stairs main tank up stairs.
That's what I really want but just don't have the room for it. Was it difficut to assemble? Where did you get the plans? And, is that a 10g or 20g tank that you used?