ReefSki
Member
Hello there,
Up for sale is a used Deltec MC500 skimmer. This is an internal skimmer, I used this in my Red Sea Max 250.
Tank has been sold so this is up for sale.
$250 shipped to the lower 48 only.
Will get some photos up soon, below is a manufacture photo, and specs.
"Sump Mounted Installation
The skimmer can be used in any sump as long as the water depth is greater than 125mm and does not exceed the max level shown on the body. An adjustable weir plate is provided which raises the water level to the correct height for any depth of water.
Technical Data
MC500 Skimmer : Article No. 31116
Can be used either in a sump or inside an aquarium.
Minimum water level when used within a sump is 5".
The skimmer does not require any form of additional feed pump.
250 litres of air are produced at the venturi.
Dimensions:
L 8.25" W 3.55" H 20.9" (allowing for removal of the cup).
The minimum sump water level is 5".
The body of the unit sits 3.25" out of the water plus the height of the collection cup.
Stocking:
Normal Stocking 175 US gallons
Heavy Stocking 120 US gallons
Electrical Consumption:
Pump - Aquabee 2000AS with Deltec Pinwheel - 10W for 110V version"
Up for sale is a used Deltec MC500 skimmer. This is an internal skimmer, I used this in my Red Sea Max 250.
Tank has been sold so this is up for sale.
$250 shipped to the lower 48 only.
Will get some photos up soon, below is a manufacture photo, and specs.
"Sump Mounted Installation
The skimmer can be used in any sump as long as the water depth is greater than 125mm and does not exceed the max level shown on the body. An adjustable weir plate is provided which raises the water level to the correct height for any depth of water.
Technical Data
MC500 Skimmer : Article No. 31116
Can be used either in a sump or inside an aquarium.
Minimum water level when used within a sump is 5".
The skimmer does not require any form of additional feed pump.
250 litres of air are produced at the venturi.
Dimensions:
L 8.25" W 3.55" H 20.9" (allowing for removal of the cup).
The minimum sump water level is 5".
The body of the unit sits 3.25" out of the water plus the height of the collection cup.
Stocking:
Normal Stocking 175 US gallons
Heavy Stocking 120 US gallons
Electrical Consumption:
Pump - Aquabee 2000AS with Deltec Pinwheel - 10W for 110V version"
