clamp question...

[Snelly40]

hey guys.


ok, so as i put my foam/rock wall in the tank, one of the pieces wants to lean forward a little bit. is there a clamp that will fit over the rim of the tank to hold it against the back wall? I know its hard to explain but i was thinking of like a 90 degree clamp to go from the back, over the top, and then angled into the tank to pin the wall against the back of the tank...

any ideas?? :smack:

 

[AJ REEF]

What about one of these? http://www.google.com/aclk?sa=l&ai=...pla&ci_kw={keyword}&rct=j&q=home+depot+clamps

 

[Snelly40]

those do look good, i was starting to look at some clamps like that too, thanks for the link!!

 

[PSU4ME]

I know exactly what you're talking about but the only ones i've seen were actual customs.....which probably gets expensive

 

[Choff]

What about rigging a magnet and string/ziptie? Get an appropriately sized magnet that you could tuck behind the rock then glue a string or ziptie to the magnet and attach that to the rock?

Edit: I would super glue an acrylic loop onto a magnet. Connect the rock to a ziptie or string then pull it through the loop and pull it tight bringing the rock into the wall.

Sent using Tapatalk 2

 

[AJ REEF]

You are welcome! They look like a handy clamp to have around. I have a few around that are similar.