sandman3467
Member
Typhon LED controller allows you to control 4 LED channels independently. Perfect for ANY LED drivers that accepts either 5V or 10V PWM input controls, such as Meanwell LED Driver (10V input PWM) or Buckpuck LED Driver (5V input PWM) as well as our very own 24 LED Driver. There is also an input for Temperature monitoring via 2 DS18B20 Temp Sensor. See below for list of compatible drivers. Note: More than 1 LED driver can be wired to each channel.
The latest version of the Typhon user manual that is available for download :
http://saltydogaquariums.webs.com/Typhon v1.pdf
Features: DEFAULT
Four independently controlled channels with either 10V PWM or 5V PWM output.
Ability to set timing (on/off), maximum intensity, and fade time for each channel.
Real Time Clock.
LCD screen displaying real time and level of intensity for each channel.
Two USB Mini inputs for DS18B20 Temperature Sensors.
One USB Mini output for I2C.
Ability to control lighting via Android App using Bluetooth.
What's included:
Fully Assembled Typhon LED Controller with ATMega328 Chip and LCD Screen.
Pre-Installed Proprietary Firmware
What's NOT included:
Project box.
12V AC/DC Power Supply.
(4) 2-pin Wire Connectors.
Temperature Sensors
Bluetooth Module
FTDI cable (for Open Source Typhon Coding)
Compatible LED Drivers:
Meanwell Dimmable Drivers.
ELN-30-XXP, ELN-60-XXP
HLN-40H-XXB, HLN-60H-XXB, HLN-80H-XXB
LPF-XXD
LuxDrive™ 3021 BuckPuck.
3021-D-E-XXXXmA