wanareef
Member
Made some up for the local club members and have several left over - for the WP-40 and 60
keep your stock controller intact just in case your Apex dies
$23.00 ea/shipped (you get tracking and insurance)
Got two on my tank with this variation of programming
(not mine)
Variable Speed Pump 1 and 2
WP40_Lt
Set Wave1
If Time 08:00 to 10:59 Then DuskDawn
If Time 11:00 to 14:00 Then Wave1
If Time 14:01 to 20:00 Then DuskDawn
If Time 20:01 to 07:59 Then Night
If Outlet Timer1 = ON Then Lt_Flush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2
If FeedA 000 Then OFF
WP40_Rt
Set Wave1
If Time 08:00 to 11:59 Then DuskDawn
If Time 12:00 to 14:00 Then Wave1
If Time 14:01 to 20:00 Then DuskDawn
If Time 20:01 to 07:59 Then Night
If Outlet Timer1 = ON Then Rt_Flush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2
If FeedA 000 Then OFF
Pump Profiles:
Wave1 (main daylight wave pattern)
Synchronize Enabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 100
Wave2 (Similar pattern to the above but Sync is disabled which creates abit more chaos)
Synchronize Disabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 100
Lt_Flush
Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 0
On time (Seconds) 30
Off time (Seconds) 30
Minimum intensity 0
Maximum intensity 90
Rt_Flush
Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 30
On time (Seconds) 30
Off time (Seconds) 30
Minimum intensity 0
Maximum intensity 90
DuskDawn (This is a lower flow wave pattern used intermittently during the light hours as well as before and after lights go out)
Synchronize Enabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 30
Night (Sets a constant 30% flow during light off hours)
Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 0
On time (Seconds) 10
Off time (Seconds) 15
Minimum intensity 30
Maximum intensity 30
Virtual Outlets
3 timers. The timers are used to create short random periods of different flow during daylight hours.
Timer1 (turns on every 120 minutes for 10 minutes. If timer 2 is on at that time, it should remain off)
OSC 120:00/010:00/000:00 Then ON
If Outlet Timer2 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF
Timer2 (turns on every 45 minutes for 15 minutes except if timer 3 is on)
OSC 045:00/015:00/000:00 Then ON
If Outlet Timer3 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF
Timer3 (turn on every 15 minutes for 5 minutes except if timer 1 is on)
OSC 015:00/005:00/000:00 Then ON
If Outlet Timer1 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF
keep your stock controller intact just in case your Apex dies
$23.00 ea/shipped (you get tracking and insurance)
Got two on my tank with this variation of programming
(not mine)
Variable Speed Pump 1 and 2
WP40_Lt
Set Wave1
If Time 08:00 to 10:59 Then DuskDawn
If Time 11:00 to 14:00 Then Wave1
If Time 14:01 to 20:00 Then DuskDawn
If Time 20:01 to 07:59 Then Night
If Outlet Timer1 = ON Then Lt_Flush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2
If FeedA 000 Then OFF
WP40_Rt
Set Wave1
If Time 08:00 to 11:59 Then DuskDawn
If Time 12:00 to 14:00 Then Wave1
If Time 14:01 to 20:00 Then DuskDawn
If Time 20:01 to 07:59 Then Night
If Outlet Timer1 = ON Then Rt_Flush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2
If FeedA 000 Then OFF
Pump Profiles:
Wave1 (main daylight wave pattern)
Synchronize Enabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 100
Wave2 (Similar pattern to the above but Sync is disabled which creates abit more chaos)
Synchronize Disabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 100
Lt_Flush
Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 0
On time (Seconds) 30
Off time (Seconds) 30
Minimum intensity 0
Maximum intensity 90
Rt_Flush
Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 30
On time (Seconds) 30
Off time (Seconds) 30
Minimum intensity 0
Maximum intensity 90
DuskDawn (This is a lower flow wave pattern used intermittently during the light hours as well as before and after lights go out)
Synchronize Enabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 30
Night (Sets a constant 30% flow during light off hours)
Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 0
On time (Seconds) 10
Off time (Seconds) 15
Minimum intensity 30
Maximum intensity 30
Virtual Outlets
3 timers. The timers are used to create short random periods of different flow during daylight hours.
Timer1 (turns on every 120 minutes for 10 minutes. If timer 2 is on at that time, it should remain off)
OSC 120:00/010:00/000:00 Then ON
If Outlet Timer2 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF
Timer2 (turns on every 45 minutes for 15 minutes except if timer 3 is on)
OSC 045:00/015:00/000:00 Then ON
If Outlet Timer3 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF
Timer3 (turn on every 15 minutes for 5 minutes except if timer 1 is on)
OSC 015:00/005:00/000:00 Then ON
If Outlet Timer1 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF