Search results

So has anyone tried the Evergrow IT2080. Am going to be switching to a 40B from my 26 SeaClear and I want to be able to keep it all...sps,lps,softies. Was wondering what your thoughts were on these lights.

I'll give you that....This is my test controller to tryout new coding. This one gets taken up to the cabin to run 1x10W LED on each channel for lighting the porch. Instead of a 10v regulator I have a 12 on mine :D . The LEDs are rated at 1A but the 2N2222 transistors only allow for 800mA current...

No....it's sold as of yesterday.

Typhon LED controller allows you to control 4 LED channels independently. Perfect for ANY LED drivers that accepts either 5V or 10V PWM input controls, such as Meanwell LED Driver (10V input PWM) or Buckpuck LED Driver (5V input PWM) as well as our very own 24 LED Driver. There is also an input...

I have a few updated controllers left over from a custom job I did for a friend of mine. The first is an updated DIY Typhon Controller with updated sketch with the following specs: (65.00) Typhon LED controller allows you to control 4 LED channels independently. Perfect for ANY LED drivers...

What are you looking at getting (controlling). If anything try the guy over at SaltyDog Aquariums He writes coding as well as builds custom controllers.

Up for sale are two Ultimate sensor shields for use with an Arduino Uno or Deumilinov that I have and build.Sensors for pH and ORP, Salinity, RTC and hookups for many different types of peripherals all via USB it's the perfect shield for your project. Uno is NOT Included......The shields are...

Here is a pic of the shield stacked on top of the Uno. I no longer use the Uno boards as I have actually made an all-in-one controller using the Atmega328-p chip.

You can see the display of a GLCD which is outputting the info using the board here and can be purchased over HERE.Shoot me your emails and i'll send what pics I can.

The all in one Aquarium Sensor Shield is here! With sensors for pH and ORP, Salinity, RTC and hookups for many different types of peripherals all via USB it's the perfect shield for your project. $125.00 free shipping Uses: Aquariums Gardening projects Hydroponics Aquaponics...

The all in one Aquarium Sensor Shield is here! With sensors for pH and ORP, Salinity, RTC and hookups for many different types of peripherals all via USB it's the perfect shield for your project. Uses: Aquariums Gardening projects Hydroponics Aquaponics Whatever use you can...

Ty......soon as it's actually working properly I'll post more pics along with a link of the code so everyone else can build one

So I had some time to play with my 3.2" TFT Controller just to add a few lines of code for Feed and Water Change Modes as well as take out the High/Low Temp Settings til I figure something out for Fahrenheit..... Feed Mode is working but am currently debugging the Water Change mode as sump is...

Thanks...this build will include 2 LED Channels and relays for heater control, 2 powerheads and a fuge light with Water temp readings as well as pH,ORP and Salinity.

Please forgive my instruction if I miss anything...Am working on 5 of these and thought to document the last build...Main Unit is finished and will document the relay/sensor housing next. Items Needed: Arduino Mega 1280 DS1307 RTC KS0108 GLCD Plastic Project Box 10mm Stand-off's DB15...

Using these CREE's yes it will be.Many people have had good coral growth on the 12 LEDs.There are ways to seed "New" coraline algae growth but I can't remember for the life of me where we started that thread.I do know some people have had success in only letting the blue LEDs run or actinic...

It's one in the same Blue Space, there will be a WIFI attachment available within the next few months for $125.But the USB port you see will be for future expansion modules. Features * Wireless 802.11 b/g network compatible * Powered by Wifly GSX module * Supports Adhoc and...

This is the first open-source controller to offer the reefing hobbyist full control of hardware and software to accommodate their reefing needs. At your fingertips is the ability to create the most sophisticated controller you will ever need. This Controller was built in the same open-source...

Ok.....so I finally got my RTC Boards in today.....right now i've got 5 (10 total)ready to ship out to anyone that wants one for $8ea shipped. PM me with your email address and i'll send you a paypal payment request and will ship as soon as it clears.