hey guys!
i'm from New Zealand and this would be my first post on this forum, i've had my tank setup for about 9 months now. i've got a 400L display, 100L ref and a 200L sump. for the last 5 months they have been fine but for the last week they have decided to sulk up and retract to a very small size in the morning, but then look a little better in the afternoon after the mh has been on but still not looking 100% like they normally are.
i've got a corn bulb anemone, carpet anemone and a rose bta
dkh - 8 (measurement taken from main display with blue lights on, salifert kit)
no3 - slightly elevated
po4 - slightly elevated
salinity - 1.025
mg - 1120ppm
ph - 8.13 (measurement taken from sump with blue lights on)
ph - 8.16 (measurement taken from main display with blues on)
ph - 8.25 (measurement taken from sump display with mh & blues on)
ph - 8.32 (measurement taken from main display with mh & blues on)
i used the same ph probe to measure.
i'm from New Zealand and this would be my first post on this forum, i've had my tank setup for about 9 months now. i've got a 400L display, 100L ref and a 200L sump. for the last 5 months they have been fine but for the last week they have decided to sulk up and retract to a very small size in the morning, but then look a little better in the afternoon after the mh has been on but still not looking 100% like they normally are.
i've got a corn bulb anemone, carpet anemone and a rose bta
dkh - 8 (measurement taken from main display with blue lights on, salifert kit)
no3 - slightly elevated
po4 - slightly elevated
salinity - 1.025
mg - 1120ppm
ph - 8.13 (measurement taken from sump with blue lights on)
ph - 8.16 (measurement taken from main display with blues on)
ph - 8.25 (measurement taken from sump display with mh & blues on)
ph - 8.32 (measurement taken from main display with mh & blues on)
i used the same ph probe to measure.