Typhon LED Controller - $65

sandman3467

sandman3467

Member
MainScreen-1-1.jpg


Typhon LED controller allows you to control 4 LED channels independently. Perfect for ANY LED drivers that accepts either 5V or 10V PWM input controls, such as Meanwell LED Driver (10V input PWM) or Buckpuck LED Driver (5V input PWM) as well as our very own 24 LED Driver. There is also an input for Temperature monitoring via 2 DS18B20 Temp Sensor. See below for list of compatible drivers. Note: More than 1 LED driver can be wired to each channel.


The latest version of the Typhon user manual that is available for download :

http://saltydogaquariums.webs.com/Typhon v1.pdf

Features: DEFAULT

Four independently controlled channels with either 10V PWM or 5V PWM output.
Ability to set timing (on/off), maximum intensity, and fade time for each channel.
Real Time Clock.
LCD screen displaying real time and level of intensity for each channel.
Two USB Mini inputs for DS18B20 Temperature Sensors.
One USB Mini output for I2C.
Ability to control lighting via Android App using Bluetooth.

What's included:

Fully Assembled Typhon LED Controller with ATMega328 Chip and LCD Screen.
Pre-Installed Proprietary Firmware

What's NOT included:

Project box.
12V AC/DC Power Supply.
(4) 2-pin Wire Connectors.
Temperature Sensors
Bluetooth Module
FTDI cable (for Open Source Typhon Coding)

Compatible LED Drivers:
Meanwell Dimmable Drivers.

ELN-30-XXP, ELN-60-XXP
HLN-40H-XXB, HLN-60H-XXB, HLN-80H-XXB
LPF-XXD

LuxDrive™ 3021 BuckPuck.

3021-D-E-XXXXmA
 
Blue Space

Blue Space

Well-Known Member
...and I hate to say it but the picture of that pcb on the carpet is a classic "No, no" from an ESD management perspective. just saying... :D
 
sandman3467

sandman3467

Member
I'll give you that....This is my test controller to tryout new coding. This one gets taken up to the cabin to run 1x10W LED on each channel for lighting the porch. Instead of a 10v regulator I have a 12 on mine :D . The LEDs are rated at 1A but the 2N2222 transistors only allow for 800mA current output Max.
 
You must log in or register to reply here.
Top