Hi all
As documented in my reef thread, I've undergone a rebuild on the C130 having moved and sadly needed to replace both the stock pump and the wet side of my MP10 - and I thought they were the only casualties but my LEDs seem to be acting weird.
I've got the Typhoon Controller programmed as before, so on 9am with a 1.5 hr fade, off at 6pm with same fade times. Extension wire is plugged into the unit as per the instructions, so black wire at top and towards the front.
Having had the tank filled now with NSW, I'm running the lights in and have noticed that they don't appear to be fading, or going off (unless via the manual timer I've got hooked up to the lights PSU).
The digits on the controller are going up/down accordingly but nothing is changing on the LEDS.
That said, I set all LEDs to 0 and did notice it get bluer.
Could it be a problem with the controller or the LEDs?
Jeff (@StevesLEDs) - are you able to offer any advice at all please?
Cheers
As documented in my reef thread, I've undergone a rebuild on the C130 having moved and sadly needed to replace both the stock pump and the wet side of my MP10 - and I thought they were the only casualties but my LEDs seem to be acting weird.
I've got the Typhoon Controller programmed as before, so on 9am with a 1.5 hr fade, off at 6pm with same fade times. Extension wire is plugged into the unit as per the instructions, so black wire at top and towards the front.
Having had the tank filled now with NSW, I'm running the lights in and have noticed that they don't appear to be fading, or going off (unless via the manual timer I've got hooked up to the lights PSU).
The digits on the controller are going up/down accordingly but nothing is changing on the LEDS.
That said, I set all LEDs to 0 and did notice it get bluer.
Could it be a problem with the controller or the LEDs?
Jeff (@StevesLEDs) - are you able to offer any advice at all please?
Cheers