Search results

  1. SPR

    Shaun's 2000 Litre (530 USG) Living Reef & Red Sea Max S 650 LED Design & Build

    Thank you I think I’ve sorted it out. No drips for over a week + I think……. Just on the S650 not the big house which is fine.
  2. SPR

    Shaun's 2000 Litre (530 USG) Living Reef & Red Sea Max S 650 LED Design & Build

    I’m counting the days and currently no drip…….. will keep an eye on it and maybe another layer of sealant just in case…..
  3. SPR

    Shaun's 2000 Litre (530 USG) Living Reef & Red Sea Max S 650 LED Design & Build

    Thank you. Yes it could easily absorb all the fish without any issues, there’s plenty of room in there. I wouldn’t bother moving corals as most of the ones in the large system are the same and it’s pretty full of coral these days.
  4. SPR

    Shaun's 2000 Litre (530 USG) Living Reef & Red Sea Max S 650 LED Design & Build

    The leak is only very minor, like something appears every 2-3 days like just a tiny drip. Just waiting to see if my latest attempt has stopped it, but I do hear you. I already have the equipment including additional pumps and pipe work made up for a 2 display system because I was going to join...
  5. SPR

    Shaun's 2000 Litre (530 USG) Living Reef & Red Sea Max S 650 LED Design & Build

    I’m still in a dilemma about the minor leak in the S650 Ive applied CT1 sealant along the seal about 4 times, and every time it’s fine for a few days, and then a tiny streak/drip appears down the glass on the front left hand side. Only minor and probably causes about 1/2 teaspoon of water on...
  6. SPR

    Shaun's 2000 Litre (530 USG) Living Reef & Red Sea Max S 650 LED Design & Build

    Here’s a little picture of the area, so fortunately it’s at the top.
  7. SPR

    Shaun's 2000 Litre (530 USG) Living Reef & Red Sea Max S 650 LED Design & Build

    It’s only very minor, hopefully I’ve sorted it, but in the event of getting worse I have the large system awaiting anyway. If it was anywhere else, lower down for example, I would be more concerned, but it’s right at the highest point along the horizontal rather than vertical side part.
  8. SPR

    Shaun's 2000 Litre (530 USG) Living Reef & Red Sea Max S 650 LED Design & Build

    The S650 seems to have developed a slight leek, very minor, right at the top left hand corner (fortunately), I’ve put a line of CT1 sealant across it several times and will just have to keep an eye on it. Its very minor at the moment so although not ideal it’s not a major concern. I have...
  9. SPR

    Shaun's 2000 Litre (530 USG) Living Reef & Red Sea Max S 650 LED Design & Build

    As a clue to the ‘brown’ incident above, the X Filer 1.7 failed on the morning we left for a 3 week trip through France into Spain. I basically left it as it wasn’t a critical piece of equipment and we had a ferry to catch from Dover to Calais. Oh and it was 4am so I didn’t feel like it! When...
  10. SPR

    Shaun's 2000 Litre (530 USG) Living Reef & Red Sea Max S 650 LED Design & Build

    The X Filter failed, so needed replacing so I decided it was time to clean the Seachem Matrix that had been in there for 4 years….. More pictures to follow!
  11. SPR

    Shaun's 2000 Litre (530 USG) Living Reef & Red Sea Max S 650 LED Design & Build

    We might have a slight ‘nutrient spike’….!
Top