Will a intank media rack fit

VP Clown · 02-09-2010, 07:56 AM

At the moment I run a Tunze 9002 - this is fixed to the electronic compartment with the magnet in the dry side. Between the 9002 and the heater section I run a eheim 1000 compact pump which feeds a Teco chiller / heater.
Would I be able to fit the media rack then the tunze and still have enough space either next to or under the tunze to run the chiller pump??

Andy

dankent · 02-09-2010, 08:04 AM

What is the foot print of the Chiller pump? I would have to say yes .. cause there is tons of room in there with the rack and 9002 skimmer, the chiller pump can sit on the bottom or lower then the skimmer? if so should be no problems at all.

VP Clown · 02-09-2010, 08:20 AM

Thanks, how much space is left between the tunze and the heater compartment??
Andy

StevieT · 02-09-2010, 09:45 AM

Most likely yes. There is about 3" of space to the left of the Tunze and quite a bit below it. There are many customers running a chiller pump with the Tunze 9002 and media basket

VP Clown · 02-09-2010, 03:03 PM

Quote:

Originally Posted by StevieT

Most likely yes. There is about 3" of space to the left of the Tunze and quite a bit below it. There are many customers running a chiller pump with the Tunze 9002 and media basket

Steve
I've just ordered, basket, cup, chemi pure and underwater light, thanks for info
got excited when i saw free shippping added lights only to find out not internatial, b*****.

Andy (DuQuesnay)

StevieT · 02-09-2010, 04:27 PM

Yeah, sorry. International is just too expensive. I may work out a promo in the future where you get a $$ off, have to figure it out on my software first and do the math.

inTank you for the order

TonyV · 02-09-2010, 04:37 PM

I run the inTank Media rack, Tuunze 9002, and a chiller in the back compartment. My chiller pump sits below the chiller ports on my 130D, and the pump sits directly below it on the bottom of the tank.

VP Clown · 02-10-2010, 03:03 AM

Quote:

Originally Posted by StevieT

Yeah, sorry. International is just too expensive. I may work out a promo in the future where you get a $$ off, have to figure it out on my software first and do the math.

inTank you for the order

Thanks, Steve no problem,
Andy

VP Clown · 02-10-2010, 03:04 AM

Quote:

Originally Posted by TonyV

I run the inTank Media rack, Tuunze 9002, and a chiller in the back compartment. My chiller pump sits below the chiller ports on my 130D, and the pump sits directly below it on the bottom of the tank.

TonyV

Thanks,

That's what I was hoping.

Andy

02-09-2010, 07:56 AM	#1 (permalink)
VP Clown Midas Blenny Join Date: Jan 2009 Location: North East England, UK Posts: 106 View Gallery Karma Komment	Will a intank media rack fit At the moment I run a Tunze 9002 - this is fixed to the electronic compartment with the magnet in the dry side. Between the 9002 and the heater section I run a eheim 1000 compact pump which feeds a Teco chiller / heater. Would I be able to fit the media rack then the tunze and still have enough space either next to or under the tunze to run the chiller pump?? Andy

02-09-2010, 08:04 AM	#2 (permalink)
dankent Tuxedo Urchin Join Date: Dec 2009 Location: Kitchener, Ontario, Canada Posts: 287 View Gallery Karma Komment	Re: Will a intank media rack fit What is the foot print of the Chiller pump? I would have to say yes .. cause there is tons of room in there with the rack and 9002 skimmer, the chiller pump can sit on the bottom or lower then the skimmer? if so should be no problems at all. __________________ Dan Kent Livestock: 2 Black Clownfish, Six Line Wrasse, Purple Basslet, White Sand Goby, 6 Mexican turbo snails, 3 nassarius snails, 10 Cerith Snails, 2 Blood shrimp, Emerald crab. Coral: Various .. specifics coming soon. Hardware: Red Sea Max 130D, Odessea MDV+ 380watt MH/T5, Vertex 250W ballast, Vortech MP10, JBJ ATO, Filter: 10 Gallon sump, Custom overflow, Coralife SS 65 skimmer, BRS media reactor. Biological Filtration: 1.5ish mix live sand and argonite mixed substrate, 30lbs of reef rock, 30lbs of Tonga and Fiji live rock Comming soon: CPR Aquafuge small Maxspect Programmable LED Octopus Extreme 160 My Tank Thread

02-09-2010, 08:20 AM	#3 (permalink)
VP Clown Midas Blenny Join Date: Jan 2009 Location: North East England, UK Posts: 106 View Gallery Karma Komment	Re: Will a intank media rack fit Thanks, how much space is left between the tunze and the heater compartment?? Andy

02-09-2010, 09:45 AM	#4 (permalink)
StevieT RS Sponsor Join Date: Jan 2009 Location: Menomonee Falls, WI Posts: 586 View Gallery Karma Komment	Re: Will a intank media rack fit Most likely yes. There is about 3" of space to the left of the Tunze and quite a bit below it. There are many customers running a chiller pump with the Tunze 9002 and media basket __________________ inTank's Forum * Direction/Video * FAQ/Guide * Contact Us * 10% off Wednesdays ------------------- Free Floss Fridays __

02-09-2010, 04:27 PM	#6 (permalink)
StevieT RS Sponsor Join Date: Jan 2009 Location: Menomonee Falls, WI Posts: 586 View Gallery Karma Komment	Re: Will a intank media rack fit Yeah, sorry. International is just too expensive. I may work out a promo in the future where you get a $$ off, have to figure it out on my software first and do the math. inTank you for the order __________________ inTank's Forum * Direction/Video * FAQ/Guide * Contact Us * 10% off Wednesdays ------------------- Free Floss Fridays __

02-09-2010, 04:37 PM	#7 (permalink)
TonyV Scopas Tang Join Date: Jan 2009 Location: San Jose, CA. Posts: 447 View Gallery Karma Komment	Re: Will a intank media rack fit I run the inTank Media rack, Tuunze 9002, and a chiller in the back compartment. My chiller pump sits below the chiller ports on my 130D, and the pump sits directly below it on the bottom of the tank. __________________ My Setup: Red Sea Max 130D, AquaticLife T5 HO 4x24, Vortech MP40w ES, 18 Gallon Sump, BM NAC6 Skimmer, Stealth 150W Heater, Aqua Euro 1/10th HP Chiller

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)