New 16g setup means ?s

Newt · 10-11-2005, 04:43 AM

Just purchased a 16 gallon nano tank! So you all should expect to see a new chronicle soon. The tank is acrylic and the dimensions are 30x12x10, so it should make for an interesting display.

The only thing now is I'm going to have to figure out all of the plumbing. There are two 1/2" holes, and one central 1" hole, so I assume that the 1" is the drain, and the 1/2" are the returns. But there is no internal overflow box.

Question 1:
Should I just use a bulkhead fit with a strainer, or make my own overflow box?

I'm not sure how well an overflow box would work because the drain hole is not on the bottom of the tank, but on the back toward the top.

Surface skimming shouldn't be too much of a problem because I plan on putting a LOT of flow through this bad boy.

I'll post a picture of what the tank looks like, and if someone could possibly put together a diagram or direct me somehow so I can figure out how to plumb this correctly that would be great.

I know what I'm doing to plumb for the return lines from the pump (Mag9), well at least up to the bulkheads, but then I'm going to try my hand at locline...which I've never used before.

I need guidance....Too bad Tigah can't come hook up the plumbing to this. LOL

Travis · 10-11-2005, 07:19 AM

Sounds pretty interesting!

The drain hole is on the right place to use a bulkhead/strainer setup, I had something like that on a 29G prop tank. It was kinda ugly though. Not sure if you can make a box with the hole at the top like that... hopefully someone better at plumbing will be along soon.

Woodstock · 10-11-2005, 07:52 AM

Nanos are nice!! One of my LFS has a nano that is just awesome! This will be a fun project for you. I can't wait to see the pics~~

Wouldn't a bulkhead look better than an overflow box?

mps9506 · 10-11-2005, 08:26 AM

You'll have to use a strainer with that setup. I eye'd that tank up also

The overflow box would look nicer because it hides the plumbing imo.
If you are worried about noise from the drain pipe you will want to plumb in a durso to prevent gurgling.

Newt · 10-11-2005, 12:32 PM

Thanks all!

I was thinking that I would have to use the strainer... I can hide the strainer with a bit of LR though, so it should work out just fine.

It should be fun... thanks guys.

Oh and for the locline return stuff, the adapter would just screw together with the bulkheads right?

Newt · 10-11-2005, 12:35 PM

Taken by the seller, mps has already seen these...LOL

mps9506 · 10-11-2005, 10:52 PM

If you want to screw the locline on the bulkhead, make sure to purchase the threaded bulkhead and not slip.

Craig Manoukian · 10-12-2005, 03:16 AM

Can't wait to see the Chronicles! Very nice indeed! I love my 20 gallon long mini, enjoy!

10-11-2005, 04:43 AM	#1 (permalink)
Newt Torch coral Join Date: Apr 2005 Location: Minnesota Posts: 595 View Gallery Karma Komment	New 16g setup means ?s Just purchased a 16 gallon nano tank! So you all should expect to see a new chronicle soon. The tank is acrylic and the dimensions are 30x12x10, so it should make for an interesting display. The only thing now is I'm going to have to figure out all of the plumbing. There are two 1/2" holes, and one central 1" hole, so I assume that the 1" is the drain, and the 1/2" are the returns. But there is no internal overflow box. Question 1: Should I just use a bulkhead fit with a strainer, or make my own overflow box? I'm not sure how well an overflow box would work because the drain hole is not on the bottom of the tank, but on the back toward the top. Surface skimming shouldn't be too much of a problem because I plan on putting a LOT of flow through this bad boy. I'll post a picture of what the tank looks like, and if someone could possibly put together a diagram or direct me somehow so I can figure out how to plumb this correctly that would be great. I know what I'm doing to plumb for the return lines from the pump (Mag9), well at least up to the bulkheads, but then I'm going to try my hand at locline...which I've never used before. I need guidance....Too bad Tigah can't come hook up the plumbing to this. LOL __________________ -Jason- Formerly "JKreef"

10-11-2005, 07:19 AM	#2 (permalink)
Travis Smilie Bartender Join Date: Nov 2003 Location: Dallas, TX Posts: 6,330 View Gallery Karma Komment Add yours!	Re: New 16g setup means ?s Sounds pretty interesting! The drain hole is on the right place to use a bulkhead/strainer setup, I had something like that on a 29G prop tank. It was kinda ugly though. Not sure if you can make a box with the hole at the top like that... hopefully someone better at plumbing will be along soon. __________________ Help build the Encyclopedia of ReefKeeping Find over 1400 Reef Aquarium Articles at The Reef Aquarium Index

10-11-2005, 07:52 AM	#3 (permalink)
Woodstock The Wand Geek was here. ;) Join Date: Nov 2003 Location: North Carolina Posts: 21,652 View Gallery Karma Komment Add yours!	Re: New 16g setup means ?s Nanos are nice!! One of my LFS has a nano that is just awesome! This will be a fun project for you. I can't wait to see the pics~~ Wouldn't a bulkhead look better than an overflow box? __________________ ~Doni Marie~ *GOT ICH???* ~120 Reef Chronicle ~ *~29 gal QT/Hospital tank~* *~3 gal Pico~* "Energy and persistence conquer all things." Benjamin Franklin __________________________________________________ ______________________________________________ 120 mixed reef, dual Reeflux 10k 250 MH, dual Actinic t5s,AquaController III, ASM g3, 2x Korallia #3, Mag 9.5 return

10-11-2005, 08:26 AM	#4 (permalink)
mps9506 They misunderestimated me Join Date: Jan 2004 Location: Charlotte and Wilmington, NC Posts: 6,862 View Gallery Karma Komment	Re: New 16g setup means ?s You'll have to use a strainer with that setup. I eye'd that tank up also The overflow box would look nicer because it hides the plumbing imo. If you are worried about noise from the drain pipe you will want to plumb in a durso to prevent gurgling. __________________ Mike "The Bandwith Bandit" Help Build Reefpedia Premium Membership Available! Support Reef Sanctuary Sponsors

10-11-2005, 12:32 PM	#5 (permalink)
Newt Torch coral Join Date: Apr 2005 Location: Minnesota Posts: 595 View Gallery Karma Komment	Re: New 16g setup means ?s Thanks all! I was thinking that I would have to use the strainer... I can hide the strainer with a bit of LR though, so it should work out just fine. It should be fun... thanks guys. Oh and for the locline return stuff, the adapter would just screw together with the bulkheads right? __________________ -Jason- Formerly "JKreef"

10-11-2005, 12:35 PM	#6 (permalink)
Newt Torch coral Join Date: Apr 2005 Location: Minnesota Posts: 595 View Gallery Karma Komment	Re: New 16g setup means ?s Taken by the seller, mps has already seen these...LOL __________________ -Jason- Formerly "JKreef"

10-11-2005, 10:52 PM	#7 (permalink)
mps9506 They misunderestimated me Join Date: Jan 2004 Location: Charlotte and Wilmington, NC Posts: 6,862 View Gallery Karma Komment	Re: New 16g setup means ?s If you want to screw the locline on the bulkhead, make sure to purchase the threaded bulkhead and not slip. __________________ Mike "The Bandwith Bandit" Help Build Reefpedia Premium Membership Available! Support Reef Sanctuary Sponsors

10-12-2005, 03:16 AM	#8 (permalink)
Craig Manoukian Regular Guy Moderator Join Date: Nov 2003 Location: Marina Del Ray, CA Posts: 15,708 View Gallery Karma Komment Add yours!	Re: New 16g setup means ?s Can't wait to see the Chronicles! Very nice indeed! I love my 20 gallon long mini, enjoy! __________________ Currently tankless. 20 Gallon mini reef with mated pair of Maroon Clowns given to Rougiem! 80 gallon reef given to Rougiem/Wooster HS.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)