Nano Cube Questions

TomV · 01-29-2007, 08:46 PM

I'm planning to change out my 10g standard tank to a 12g Nano Cube. I plan to use all the rock and half of the water from the 10g when I do the switch. I will use most, if not all the Live Sand substrate and will supplement with the Southdown that I've had on hand for a while. I think this will produce a smaller, shorter cycle and will ease the transition.

I have some questions:

1. Will the lighting that comes with the cube be enough for what I will keep: Shrooms, Zoos, Xenia, maybe some other small polyps ?

2. How should I alter the filtration if keeping a reef? Should it be altered?

3. Where should the heater go? What kind of heater should I use so it wont melt anything? (I am using a small heater now for my 10g, can't remember the wattage). I have smaller ones too.

4. Can I use a Protein Skimmer with it? Where would it be put?

5. Does the filtration in the back work like a sump?

Thanks in advance!

saltwaterfarm · 01-29-2007, 08:54 PM

The PC lighting should be fine for those things.
If there are bio-balls and/or other nitrate factories in the wet/dry filter... they will need to be addressed.
You may be able to put a heater in the back...
There are some skimmers designed for the nanos... stay away from the fission one. The size will determine the placement... I think there are some made to fit in the back part of the tank.

I'm sure some more people who actually know more about this specific tank setup will chime in...

dobejazz · 01-30-2007, 01:28 AM

Congrats on the upgrade ! I agree with Lisa the lights will be fine for what you have. a small heater should fit in one of the back compartments. I haven't had a need for a heater in my 24g nano cube so I've not tried it

BrothaWolf · 01-30-2007, 02:16 AM

Lisa gave you alot of good info.... nothing else to add.

daveat · 01-30-2007, 08:48 PM

1. Will the lighting that comes with the cube be enough for what I will keep: Shrooms, Zoos, Xenia, maybe some other small polyps ?

if you are getting the DX (36watts i think) then yes it should be perfect!!

2. How should I alter the filtration if keeping a reef? Should it be altered?

get rid of all materials for filtration... buy a nanoskim plate (little thingy that sucks the water off the surface, mounts on the outside of sump area) and put a little peice of foam between it and sump area for mechanical filtration (works great on my 24)

3. Where should the heater go? What kind of heater should I use so it wont melt anything? (I am using a small heater now for my 10g, can't remember the wattage). I have smaller ones too.

heater should fit in back

4. Can I use a Protein Skimmer with it? Where would it be put?

you can do a HOB skimmer or you can checkout sapphire and see if they have a skimmer for the 12

5. Does the filtration in the back work like a sump?

kind of.. some people put lights back there and use it like a refugium too!!!

BigAl07 · 03-05-2007, 05:40 PM

TomV how's this tank coming along? Any pics? Updates?

TomV · 03-05-2007, 10:09 PM

Well, I decided to stay with my 10g. I got a decent cleaning crew for it and got a new bulb for the 96w Corallife quad fixture.

I have a couple gorgonians in it now, a strawberry pseudochromis, an Oscellaris Clown, a Pajama Cardinal, and a good sized cleaning crew.

The Yellow Gorgonian is extending its polyps a little bit (been in the tank for about a week now). The purple isn't. The cleaning crew is doing what it should. The fish seem happy.

BigAl07 · 03-05-2007, 10:38 PM

If you don't mind my asking (gonna ask anyway just to save time) what changed your mind??

I currently have a SW 10g at home (set up to see if it was really possible and practical to do SW) and am now researching the idea of getting a Nano-Cube to go on my desk at work. The reason for the cube is purely about dimensions. If I didn't go with a "cube" design I would have to settle with a beta bowl or something really tiny. The cube gives me a maximum amount of H2O in the alloted space on my desk (already have that area cleaned and ready for the tank along with support storage and power strips underneath).

Your tank sounds VERY nice. Get some pics of it and post em back here.

Allen

01-29-2007, 08:46 PM	#1 (permalink)
TomV Neon dottyback Join Date: Apr 2004 Location: New Hampshire, USA Posts: 632 View Gallery Karma Komment	Nano Cube Questions I'm planning to change out my 10g standard tank to a 12g Nano Cube. I plan to use all the rock and half of the water from the 10g when I do the switch. I will use most, if not all the Live Sand substrate and will supplement with the Southdown that I've had on hand for a while. I think this will produce a smaller, shorter cycle and will ease the transition. I have some questions: 1. Will the lighting that comes with the cube be enough for what I will keep: Shrooms, Zoos, Xenia, maybe some other small polyps ? 2. How should I alter the filtration if keeping a reef? Should it be altered? 3. Where should the heater go? What kind of heater should I use so it wont melt anything? (I am using a small heater now for my 10g, can't remember the wattage). I have smaller ones too. 4. Can I use a Protein Skimmer with it? Where would it be put? 5. Does the filtration in the back work like a sump? Thanks in advance! __________________ TomV 10g Nano Re-established 3/06: 96W PC Quad, Seaclone 100 modded, Hagen 301 PH'd, FOWLR for now. 55g 3-15-05: 130w PC lights, 250w Ebo Jager htr., 200w htr., Aquaclear 500 DIY Fuge. Softies Tank

01-29-2007, 08:54 PM	#2 (permalink)
saltwaterfarm Manta Ray Join Date: Oct 2006 Location: Maryland Posts: 3,222 View Gallery Karma Komment Add yours!	Re: Nano Cube Questions The PC lighting should be fine for those things. If there are bio-balls and/or other nitrate factories in the wet/dry filter... they will need to be addressed. You may be able to put a heater in the back... There are some skimmers designed for the nanos... stay away from the fission one. The size will determine the placement... I think there are some made to fit in the back part of the tank. I'm sure some more people who actually know more about this specific tank setup will chime in... __________________ Lisa 90 Gal AGA, DIY Sump/Fuge, Current Outer Orbit 250w MH's with T5's. AquaC Remora Pro Skimmer, RK2.[/font] Purple LTA, pair of Percula Clowns, Clams, Softies, Shrooms, Ricordea, Echinophyllia, Torch, Frogspawn, Blastos, Sponges, Acro, Wellso, the NEW Zoa Mountain, and some more stuff... 3 Gal Sexy Shrimp Pico. 29 Gal Oceanic BioCube, Current Sunpod 150w MH.

01-30-2007, 01:28 AM	#3 (permalink)
dobejazz Elegance coral Join Date: Mar 2005 Location: Illinois Posts: 1,246 View Gallery Karma Komment	Re: Nano Cube Questions Congrats on the upgrade ! I agree with Lisa the lights will be fine for what you have. a small heater should fit in one of the back compartments. I haven't had a need for a heater in my 24g nano cube so I've not tried it __________________ Kelli

01-30-2007, 02:16 AM	#4 (permalink)
BrothaWolf Acropora Join Date: Aug 2006 Posts: 1,798 View Gallery Karma Komment Add yours!	Re: Nano Cube Questions Lisa gave you alot of good info.... nothing else to add. __________________ 75 Gal AGA Nano - 115lbs LR 140lbs LS Tunze 6025 x 3 40 gal DIY Sump/fuge 20lb LS 26lb LR Outer Orbit 150 HQI Mh x 2, 54w T5 x 4, 18 moons, ASM G3 Mated pair Yashia Gobies (seperated) and Red Band Pistol Shrimp, True Percula, Purple Fire Fish, Yellow Clown Goby, Orange Back Fairy Wrasse, Barber Pole Goby, Blood Shrimp, Crocea Clam, Scarlet Hermits, Cerith, Nassarius, Nerite and Margarita Snails (hold the salt) Zoas, Rics & Shrooms, Xenia, Hammer & Frog Spawn, Star Polyps, Blasto, Blue Anthelia, Lord Acans 29 Gal Oceanic Bio Cube- 40lbs LR 30lbs LS Sapphire Skimmer, DIY Nanotuners 4.36 Lighting, DIY Moonlights, DIY Mod CPR Refugium Randalls Goby, Zoa's ,Trach,Shrooms President: Crabs Make Me Itch Society

01-30-2007, 08:48 PM	#5 (permalink)
daveat Sea Pen Join Date: Jan 2006 Posts: 322 View Gallery Karma Komment	Re: Nano Cube Questions 1. Will the lighting that comes with the cube be enough for what I will keep: Shrooms, Zoos, Xenia, maybe some other small polyps ? if you are getting the DX (36watts i think) then yes it should be perfect!! 2. How should I alter the filtration if keeping a reef? Should it be altered? get rid of all materials for filtration... buy a nanoskim plate (little thingy that sucks the water off the surface, mounts on the outside of sump area) and put a little peice of foam between it and sump area for mechanical filtration (works great on my 24) 3. Where should the heater go? What kind of heater should I use so it wont melt anything? (I am using a small heater now for my 10g, can't remember the wattage). I have smaller ones too. heater should fit in back 4. Can I use a Protein Skimmer with it? Where would it be put? you can do a HOB skimmer or you can checkout sapphire and see if they have a skimmer for the 12 5. Does the filtration in the back work like a sump? kind of.. some people put lights back there and use it like a refugium too!!!

03-05-2007, 05:40 PM	#6 (permalink)
BigAl07 Reef Addict (hopeless) Join Date: Mar 2007 Location: Waynesville, North Carolina Posts: 13,746 View Gallery Karma Komment Add yours!	Re: Nano Cube Questions TomV how's this tank coming along? Any pics? Updates?

03-05-2007, 10:09 PM	#7 (permalink)
TomV Neon dottyback Join Date: Apr 2004 Location: New Hampshire, USA Posts: 632 View Gallery Karma Komment	Re: Nano Cube Questions Well, I decided to stay with my 10g. I got a decent cleaning crew for it and got a new bulb for the 96w Corallife quad fixture. I have a couple gorgonians in it now, a strawberry pseudochromis, an Oscellaris Clown, a Pajama Cardinal, and a good sized cleaning crew. The Yellow Gorgonian is extending its polyps a little bit (been in the tank for about a week now). The purple isn't. The cleaning crew is doing what it should. The fish seem happy. __________________ TomV 10g Nano Re-established 3/06: 96W PC Quad, Seaclone 100 modded, Hagen 301 PH'd, FOWLR for now. 55g 3-15-05: 130w PC lights, 250w Ebo Jager htr., 200w htr., Aquaclear 500 DIY Fuge. Softies Tank

03-05-2007, 10:38 PM	#8 (permalink)
BigAl07 Reef Addict (hopeless) Join Date: Mar 2007 Location: Waynesville, North Carolina Posts: 13,746 View Gallery Karma Komment Add yours!	Re: Nano Cube Questions If you don't mind my asking (gonna ask anyway just to save time) what changed your mind?? I currently have a SW 10g at home (set up to see if it was really possible and practical to do SW) and am now researching the idea of getting a Nano-Cube to go on my desk at work. The reason for the cube is purely about dimensions. If I didn't go with a "cube" design I would have to settle with a beta bowl or something really tiny. The cube gives me a maximum amount of H2O in the alloted space on my desk (already have that area cleaned and ready for the tank along with support storage and power strips underneath). Your tank sounds VERY nice. Get some pics of it and post em back here. Allen

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)