Skimmer help?

tx29fan · 03-29-2005, 10:24 PM

I have a etss800 clone skimmer which runs on a gen-x mak iv pump that is directly behind my sump and tank. The bottom of the skimmer is level with the top of the sump and the 1 1/2 pvc return from the skimmer runs over the top edge and down into the skimmer. I am not getting much skimate. My question is..is the height at which an external skimmer is placed have any effect on the efficiency of it? would moving it down or up help?

tx29fan · 03-29-2005, 10:25 PM

I also have the overflow tube run into an open bucket. Does this matter?

Travis · 03-29-2005, 10:27 PM

Since we have pretty much the same skimmer... where is the water level before the thick foam starts inside the skimmer?

Are there any angles coming off the gate valve? I have two 90's coming off mine and I think it affects the skimming. Trying to add a hose to the end of that completely kills all skimmate production.

T

tx29fan · 03-29-2005, 10:39 PM

there is one 90 on the skimmer..then the gate valve..then a 90 where it goes down into the sump. I can adjust the foam, but when I get it higher in the column there are less bubbles. the best reaction I have is when I set it to where the water level (where the foam starts) is at the base of the round reaction column, but then the skimate seems to collect in the tube itself near the top of the collection cup. I have foam over the opening of the reaction chamber in the collection cup..but all the skimate seems to collect on the chamer itself, not drain into my bucket

Travis · 03-29-2005, 11:27 PM

Could be the 90 before the gate valve.

Was it working well before and this is new? Have you cleaned the cup lately?

Also, this is rather disgusting but helps... I blow on the end of the drain line for the collection cup. That clears stuff from the nipple built into the cup so skimmate can get into the cup better.

What are you using as a waste collector? And why are we not just talking on the phone?

tx29fan · 03-29-2005, 11:41 PM

RING !!!!

03-29-2005, 10:25 PM	#2 (permalink)
tx29fan Midas Blenny Join Date: Sep 2004 Location: Lake Dallas Texas Posts: 109 View Gallery Karma Komment	I also have the overflow tube run into an open bucket. Does this matter? __________________ is there a 12 step program for this addiction???

03-29-2005, 10:27 PM	#3 (permalink)
Travis Smilie Bartender Join Date: Nov 2003 Location: Dallas, TX Posts: 6,640 View Gallery Karma Komment Add yours!	Since we have pretty much the same skimmer... where is the water level before the thick foam starts inside the skimmer? Are there any angles coming off the gate valve? I have two 90's coming off mine and I think it affects the skimming. Trying to add a hose to the end of that completely kills all skimmate production. T __________________ Help build the Encyclopedia of ReefKeeping Find over 1400 Reef Aquarium Articles at The Reef Aquarium Index

03-29-2005, 10:39 PM	#4 (permalink)
tx29fan Midas Blenny Join Date: Sep 2004 Location: Lake Dallas Texas Posts: 109 View Gallery Karma Komment	there is one 90 on the skimmer..then the gate valve..then a 90 where it goes down into the sump. I can adjust the foam, but when I get it higher in the column there are less bubbles. the best reaction I have is when I set it to where the water level (where the foam starts) is at the base of the round reaction column, but then the skimate seems to collect in the tube itself near the top of the collection cup. I have foam over the opening of the reaction chamber in the collection cup..but all the skimate seems to collect on the chamer itself, not drain into my bucket __________________ is there a 12 step program for this addiction???

03-29-2005, 11:27 PM	#5 (permalink)
Travis Smilie Bartender Join Date: Nov 2003 Location: Dallas, TX Posts: 6,640 View Gallery Karma Komment Add yours!	Could be the 90 before the gate valve. Was it working well before and this is new? Have you cleaned the cup lately? Also, this is rather disgusting but helps... I blow on the end of the drain line for the collection cup. That clears stuff from the nipple built into the cup so skimmate can get into the cup better. What are you using as a waste collector? And why are we not just talking on the phone? __________________ Help build the Encyclopedia of ReefKeeping Find over 1400 Reef Aquarium Articles at The Reef Aquarium Index

03-29-2005, 11:41 PM	#6 (permalink)
tx29fan Midas Blenny Join Date: Sep 2004 Location: Lake Dallas Texas Posts: 109 View Gallery Karma Komment	RING !!!! __________________ is there a 12 step program for this addiction???

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)