Please Help!!!!

Snelly40 · 04-13-2006, 05:38 PM

I currently have a 24g nanocube dx with a good amount of things in it, listed at bottom. I really feel like a protein skimmer will help me out, however everywhere i go people are saying that i can not fit one in the back chambers of the nanocube or that i will have to remove the top lid. is there any way around this, i would rather not buy the fission skimmer for i hear it is no good. Does any one know if it is possible to remove the back of the lid of a nano so i dont have to purchase new lights????
any help will be greatly greatly appreciated. thank you.
i was looking at the tunze 9002 and the aqua c remora, but i dont know what to do

-jason

Scooterman · 04-13-2006, 05:49 PM

http://www.premiumaquatics.com/Merch...egory_Code=ASM

http://www.reeffrontiers.com/forums/...ad.php?t=14377

Snelly40 · 04-13-2006, 05:53 PM

any feedback on that ASM-mini G skimmer???

Scooterman · 04-13-2006, 06:23 PM

Not personally but heard they work great, I was hoping someone who had one would post here about them.

Snelly40 · 04-15-2006, 11:08 AM

ok everyone,
i finally have figured out what to do.
i have had some help from the help desk at marinedepot.com,they have been very helpful and even talked me out of a more expensive skimmer.
I am going to get the aqua c remora for my 24 gallon, and cut off just the top of the left side chamber, where the sponge filter goes, by doing this it will allow for space for the skimmer and will be an easy mod.
thank for your suggestions as well
-jason

jimeluiz · 04-15-2006, 11:24 AM

Congrats on finding your way through that dilemma. - And for posting the solution. Posting a pic in the DIY area could be helpful to others...

Good luck!

Witfull · 04-15-2006, 11:27 AM

excellent,,,,kudos to Marine Depot and kudos to you for diligence!!

Snelly40 · 04-15-2006, 11:51 AM

Thanks for the suort guys, I will be sure to keep you updated when the skimmer gets here, and i will take some pics along the way so the next person hopefully doesnt have to rack their brain like i did or feel bad for asking about a hundred questios to everyone i know!!!
thanks again
-jason

Scooterman · 04-15-2006, 11:54 AM

marine depot is the

great customer service, I own stock in them

04-13-2006, 05:38 PM	#1 (permalink)
Snelly40 Manta Ray Join Date: Apr 2006 Location: Charlotte, NC Posts: 3,098 View Gallery Karma Komment	Please Help!!!! I currently have a 24g nanocube dx with a good amount of things in it, listed at bottom. I really feel like a protein skimmer will help me out, however everywhere i go people are saying that i can not fit one in the back chambers of the nanocube or that i will have to remove the top lid. is there any way around this, i would rather not buy the fission skimmer for i hear it is no good. Does any one know if it is possible to remove the back of the lid of a nano so i dont have to purchase new lights???? any help will be greatly greatly appreciated. thank you. i was looking at the tunze 9002 and the aqua c remora, but i dont know what to do -jason __________________ Snelly's 90gal Reef-O-Rama *Member-"Crabs Are Evil" Society*

04-13-2006, 05:49 PM	#2 (permalink)
Scooterman Elegance coral Join Date: Nov 2003 Location: Lafayette, Louisiana Posts: 1,239 View Gallery Karma Komment	Re: Please Help!!!! http://www.premiumaquatics.com/Merch...egory_Code=ASM http://www.reeffrontiers.com/forums/...ad.php?t=14377 __________________ Scott Ardoin (Ard-Dwan)

04-13-2006, 05:53 PM	#3 (permalink)
Snelly40 Manta Ray Join Date: Apr 2006 Location: Charlotte, NC Posts: 3,098 View Gallery Karma Komment	Re: Please Help!!!! any feedback on that ASM-mini G skimmer??? __________________ Snelly's 90gal Reef-O-Rama *Member-"Crabs Are Evil" Society*

04-13-2006, 06:23 PM	#4 (permalink)
Scooterman Elegance coral Join Date: Nov 2003 Location: Lafayette, Louisiana Posts: 1,239 View Gallery Karma Komment	Re: Please Help!!!! Not personally but heard they work great, I was hoping someone who had one would post here about them. __________________ Scott Ardoin (Ard-Dwan)

04-15-2006, 11:08 AM	#5 (permalink)
Snelly40 Manta Ray Join Date: Apr 2006 Location: Charlotte, NC Posts: 3,098 View Gallery Karma Komment	Re: Please Help!!!! ok everyone, i finally have figured out what to do. i have had some help from the help desk at marinedepot.com,they have been very helpful and even talked me out of a more expensive skimmer. I am going to get the aqua c remora for my 24 gallon, and cut off just the top of the left side chamber, where the sponge filter goes, by doing this it will allow for space for the skimmer and will be an easy mod. thank for your suggestions as well -jason __________________ Snelly's 90gal Reef-O-Rama *Member-"Crabs Are Evil" Society*

04-15-2006, 11:24 AM	#6 (permalink)
jimeluiz Achilles Tang Join Date: Nov 2003 Location: Niteroi, Brasil Posts: 829 View Gallery Karma Komment	Re: Please Help!!!! Congrats on finding your way through that dilemma. - And for posting the solution. Posting a pic in the DIY area could be helpful to others... Good luck! __________________ Sold the tank prior to our move. Setting up our new life in Brazil.

04-15-2006, 11:51 AM	#8 (permalink)
Snelly40 Manta Ray Join Date: Apr 2006 Location: Charlotte, NC Posts: 3,098 View Gallery Karma Komment	Re: Please Help!!!! Thanks for the suort guys, I will be sure to keep you updated when the skimmer gets here, and i will take some pics along the way so the next person hopefully doesnt have to rack their brain like i did or feel bad for asking about a hundred questios to everyone i know!!! thanks again -jason __________________ Snelly's 90gal Reef-O-Rama *Member-"Crabs Are Evil" Society*

04-15-2006, 11:54 AM	#9 (permalink)
Scooterman Elegance coral Join Date: Nov 2003 Location: Lafayette, Louisiana Posts: 1,239 View Gallery Karma Komment	Re: Please Help!!!! marine depot is the great customer service, I own stock in them __________________ Scott Ardoin (Ard-Dwan)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)