Source for Acrylic tube

newsalt · 01-06-2004, 08:56 PM

I've been wanting to make my own air driven skimmer. I can't seen to find a supplier of Acrylic that will allow me to buy acrylic tube in lenghts less than 6 feet long. I called usplastics and they to would only sell 6ft minimum pieces. If I do that, I'll have so much left over. Some pieces, I only need 1ft. Can anyone give me some names of acrylic suppliers?

Thanks

johnlewis · 01-06-2004, 10:12 PM

You may find some local suppliers with scrap otherwise it's difficult to get anything less than 6'. Maybe you can do a group buy and divide a 6' piece with some local members.

danny254 · 01-06-2004, 10:59 PM

Plastics shops, should be the answer, they can order some if they don't have it, and usually you wouldn't have to buy a miniumun length. I just recently ordered 20" of 6" extruded acrylic tube for my Ca reactor for around 30 bucks.

Danny

reefer_wannabe · 01-10-2004, 09:14 PM

www.customaquatics.com I bought 24" of 4.5" cast acrylic tubing for about $20. I used it for a Nielsen Reactor. Works great!

RanRoc · 01-10-2004, 09:19 PM

I believe that Aquatic-Eco systems sell acrylic tubing as well. I think it's:
www.aquaticeco.com
-RY

reefer_wannabe · 01-11-2004, 06:34 PM

Opps! My bad. I purchased mine from aquatic eco-systems. I have had good luck ordering stuff from custom aquatics, just not the clear acrylic tubing.....

01-06-2004, 08:56 PM	#1 (permalink)
newsalt Torch coral Join Date: Dec 2003 Posts: 578 View Gallery Karma Komment	Source for Acrylic tube I've been wanting to make my own air driven skimmer. I can't seen to find a supplier of Acrylic that will allow me to buy acrylic tube in lenghts less than 6 feet long. I called usplastics and they to would only sell 6ft minimum pieces. If I do that, I'll have so much left over. Some pieces, I only need 1ft. Can anyone give me some names of acrylic suppliers? Thanks

01-10-2004, 09:14 PM	#4 (permalink)
reefer_wannabe Tubeworm Join Date: Nov 2003 Location: Rantoul, IL Posts: 34 View Gallery Karma Komment	www.customaquatics.com I bought 24" of 4.5" cast acrylic tubing for about $20. I used it for a Nielsen Reactor. Works great! __________________ Bill http://www.cimaonline.us Join a local society or club today. You'll be glad you did!

01-10-2004, 09:19 PM	#5 (permalink)
RanRoc Scopas Tang Join Date: Nov 2003 Location: Central Florida: GO KNIGHTS!!! Posts: 443 View Gallery Karma Komment	I believe that Aquatic-Eco systems sell acrylic tubing as well. I think it's: www.aquaticeco.com -RY __________________ My Disclaimer for any Advice I Give: I Could Be Wrong... Randy's Rockin' Reef MANGROVE ROOT GANG

01-11-2004, 06:34 PM	#6 (permalink)
reefer_wannabe Tubeworm Join Date: Nov 2003 Location: Rantoul, IL Posts: 34 View Gallery Karma Komment	Opps! My bad. I purchased mine from aquatic eco-systems. I have had good luck ordering stuff from custom aquatics, just not the clear acrylic tubing..... __________________ Bill http://www.cimaonline.us Join a local society or club today. You'll be glad you did!

01-06-2004, 10:12 PM	#2 (permalink)
johnlewis Scopas Tang Join Date: Nov 2003 Location: Brighton, MI USA Posts: 448 View Gallery Karma Komment	You may find some local suppliers with scrap otherwise it's difficult to get anything less than 6'. Maybe you can do a group buy and divide a 6' piece with some local members.

01-06-2004, 10:59 PM	#3 (permalink)
danny254 Midas Blenny Join Date: Nov 2003 Location: Redding, northern CA Posts: 101 View Gallery Karma Komment	Plastics shops, should be the answer, they can order some if they don't have it, and usually you wouldn't have to buy a miniumun length. I just recently ordered 20" of 6" extruded acrylic tube for my Ca reactor for around 30 bucks. Danny

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)