aaarrghh... stupid anemone

scott.cummings · 03-17-2004, 08:21 AM

Put a BTA in my tank a few days ago. It is a captive clone and seems happy in my tank. It moved around a bit until it found a rock it liked and attached. Fed it some mysis and all was good. Put a tomato clown in the tank and it went straight to the BTA and hosted. Great, just what we wanted. Then the BTA started moving. All the way under the rockwork to the back, upside down with its tentacles in the substrate. Does it not like the clown?? Cant get to it in the rocks. Cant point a powerhead at it from behind. Can barely see the anemone and havent seen the clown for a day. Any thoughts.

caja · 03-17-2004, 08:26 AM

chances are it'll come back out looking for more light. keep an eye on it, the last thing you want is for it to die back there. it'll quickly foul the tank if it dies behind the rockwork and you can't get at it.

sorcerer · 03-17-2004, 10:47 AM

Is the anemone large enough to host the clown? Clowns can stress and injure the anemone especially during the intial "get to know me" routine. The general rule I have always been given is that the anemone should be at least 2.5x the clown's lenght in diameter to be a host.

If the anemone is too small for the clown, it may be stressed and trying to get away.

Tarasco · 03-17-2004, 12:05 PM

You may want to experiment by removing the clown from the tank for a couple of days and seeing what happens. I have heard stories of what appear to be perfectly happy BTA's deciding to move from their spot, then getting sucked into powerheads and killed. This will seriously ruin your day if it happens.

And welcome to RS!

scott.cummings · 03-17-2004, 12:08 PM

the clown is about 1 1/4" and the BTA is 4" but the clown is very enthusiastic about the anemone. it rolls around and moves alot in the anemone.

scott.cummings · 03-17-2004, 12:14 PM

the clown is about 1 1/4" and the BTA is 4" but the clown is very enthusiastic about the anemone. it rolls around and moves alot in the anemone.

03-17-2004, 08:21 AM	#1 (permalink)
scott.cummings Tunicate Join Date: Mar 2004 Posts: 9 View Gallery Karma Komment	aaarrghh... stupid anemone Put a BTA in my tank a few days ago. It is a captive clone and seems happy in my tank. It moved around a bit until it found a rock it liked and attached. Fed it some mysis and all was good. Put a tomato clown in the tank and it went straight to the BTA and hosted. Great, just what we wanted. Then the BTA started moving. All the way under the rockwork to the back, upside down with its tentacles in the substrate. Does it not like the clown?? Cant get to it in the rocks. Cant point a powerhead at it from behind. Can barely see the anemone and havent seen the clown for a day. Any thoughts.

03-17-2004, 10:47 AM	#3 (permalink)
sorcerer Court Computer Wiz Join Date: Nov 2003 Location: Nashville,TN Posts: 252 View Gallery Karma Komment	Is the anemone large enough to host the clown? Clowns can stress and injure the anemone especially during the intial "get to know me" routine. The general rule I have always been given is that the anemone should be at least 2.5x the clown's lenght in diameter to be a host. If the anemone is too small for the clown, it may be stressed and trying to get away. __________________ ------------ walt --------------------- ...and I thought woodworking was an expensive hobby..... 75G Oceanic Reef Tank, 30G Acrylic sump, 12G fuge, AquaC EV-120 skimmer, AquaMedic Kalkwasser Reactor, Mag 12 return pump, FlexiFlow dosing pump. 2-250W AB 10,000K MH, 2 95W Actinic VHO Sorcerer's Home Office Reef - 12G JBJ Nanocube, Minijet 606 pump, 50W heater, 12lbs LR ----------- http://www.reefsanctuary.com/Banners/RS_banner4.gif

03-17-2004, 12:05 PM	#4 (permalink)
Tarasco Plate Coral Join Date: Nov 2003 Location: San Diego, CA Posts: 724 View Gallery Karma Komment	You may want to experiment by removing the clown from the tank for a couple of days and seeing what happens. I have heard stories of what appear to be perfectly happy BTA's deciding to move from their spot, then getting sucked into powerheads and killed. This will seriously ruin your day if it happens. And welcome to RS! __________________ Mike "I saw what the governor makes. That's like four hands of blackjack." -- Charles Barkley on why he wasn't seriously considering becoming the Governor of Alabama

03-17-2004, 08:26 AM	#2 (permalink)
caja Cabbage Leather Join Date: Jan 2004 Location: Northern VA Posts: 371 View Gallery Karma Komment	chances are it'll come back out looking for more light. keep an eye on it, the last thing you want is for it to die back there. it'll quickly foul the tank if it dies behind the rockwork and you can't get at it.

03-17-2004, 12:08 PM	#5 (permalink)
scott.cummings Tunicate Join Date: Mar 2004 Posts: 9 View Gallery Karma Komment	the clown is about 1 1/4" and the BTA is 4" but the clown is very enthusiastic about the anemone. it rolls around and moves alot in the anemone.

03-17-2004, 12:14 PM	#6 (permalink)
scott.cummings Tunicate Join Date: Mar 2004 Posts: 9 View Gallery Karma Komment	the clown is about 1 1/4" and the BTA is 4" but the clown is very enthusiastic about the anemone. it rolls around and moves alot in the anemone.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)