Reef Sanctuary - View Single Post

Craig Manoukian · 11-21-2003, 04:05 AM

I don't know if this will help. I have to make a gang valve to allow air into the pump intake for my Ocean Runner 2700 so that the pinwheel can make the micro bubbles. The venturi is on the outflow from the pump.

I am going to drill a hole through the intake fitting big enough to accomodate some air tubing which will lay across the intake opening. I will purferate the tubing to allow lots of bubble holes and then seal one end and placing a gang valve on the other end to control the air flow.

Will report back on how this works and hope this makes sense.

11-21-2003, 04:05 AM	#11 (permalink)
Craig Manoukian Regular Guy Moderator Join Date: Nov 2003 Location: Marina Del Ray, CA Posts: 18,352 View Gallery Karma Komment Add yours!	I don't know if this will help. I have to make a gang valve to allow air into the pump intake for my Ocean Runner 2700 so that the pinwheel can make the micro bubbles. The venturi is on the outflow from the pump. I am going to drill a hole through the intake fitting big enough to accomodate some air tubing which will lay across the intake opening. I will purferate the tubing to allow lots of bubble holes and then seal one end and placing a gang valve on the other end to control the air flow. Will report back on how this works and hope this makes sense. __________________ Currently tankless. 20 Gallon mini reef with mated pair of Maroon Clowns given to Rougiem! 80 gallon reef given to Rougiem/Wooster HS.