| Stand is roughly 49 x 19 x 34"(h)
It was made w/ pine and painted black. I copy and pasted what socalcreations told me regarding the painting process:
"I first started with wood filler and that took forever, so I got a great tip from a woodworking forum which recomended joint compound to fill in the grains (why didin't I think of that!). So I started with about 3 coats of joint compound (the stuff used on drywall), and filled in the grains, next I went through and basically sanded most of it off, leaving just enough to fill in the grains. Next was about 2 coats of Killz oil base primer, to make sure everything was filled in and to start a good base coat for the paint, then I painted all surfaces with about 3 coats of flat black acrylic paint, then 3 coats of satin polyurethane, with spar urethane used inside to help protect even more against humidity, of course a light sanding with 400 grit inbetween each coat for a super smooth finish. That's about it!" |