| NaClH2O Addicted
Join Date: Aug 2008 Location: Charlotte, NC, USA
Posts: 10,548
| Vortech MP20 in the RSM I just put a new VorTech MP20 in the RSM, and I am very impressed with it! I'll be doing more playing around with the different modes and settings later, but it's creating flow in every part of the tank. I have it on short pulse mode now, which creates an adjustable frequency between minimum and maximum speeds, and is creating wave action on the surface. As I've read, the flow is very broad, so even at a max of supposedly 2000 gph it isn't blowing things off the rocks. Does a great job of suspending detritis too, so it can be pulled into the filtration section. Along with putting the Vortech in, I also gave the tank a good razor scraping, replaced all of my chemical media, and remounted some corals, including attaching a Palau Nepthea frag I had been growing out on my frag rack. So, my corals were all a bit "upset" with all the tank maintence going on, and many of them are sliming a bit, but the new pump is doing a great job of removing the slime and keeping it suspended till it gets filtered out. I can no longer see any dead spots in the tank. The coralline encrusted Koralia has been retired! So far no negatives on the Vortech, and it's very quiet. Amazing what a single pump can do!
__________________
aka Terry Excellence in reefkeeping is achieved by mastering the fundamentals, and learning from mistakes. No such thing as an evil crab. Only humans have the ability to be evil. 34g Red Sea Max 130 (April 07), ~50-60 lbs. live rock, Aragonite substrate. Lighting: Current USA Outer Orbit Pro - 150W 14K HQI, 2 x 24W Blue Plus T5 HO Fluorescent by ATI, 1 x 24W KZ Fiji Purple T5, 1 x 24W Super Actinic T5 HO Fluorescent by UVL, Vortech MP20, Vortech battery backup, LifeReef RSM Siphon, EShopps RS-75 Sump, Nano Reef Systems custom sump skimmer, Simplicity media reactor, Tunze Osmolator ATO, ReefKeeper Lite L3 controller Reefmack's RSM 130 and... Red Sea Max Owners Club and My JBJ 6G in this thread |