You're right!!!! this is not good. do you think I can run them the way I have them for 1 month? I plan on getting a giant Reeflo to replace these 2 and install that one correctly. but thats a few paychecks away
2. Pump installation method
This pump is not self-priming. It is recommended that the pump shall be installed in a position lower than the liquid level of the suction tank by at least 12 inches (30 cm). If this distance is too short, air may enter the pump, causing damage.
3. Direction of pump discharge port
The discharge port can be directed as desired. However, for efficient elimination of air in the pump end, it is recommended that the discharge port be positioned in the horizontal direction.
4. Anchoring of base
The base of the pump must be anchored firmly. The pump must not be mounted in a vertical position.