Reef Sanctuary - View Single Post

framerguy · 02-20-2008, 08:04 PM

Sorry, I was putting these on the other day and lost my internet service then forgot about it. Here are pics of my system . The line with the red valve is the 1" line to the sump. The line with the black valve is the 3/4" line to the fuge.The left line with the disconnect is the return.

This is the line to the fuge. It enters at the far end of the fuge and...

exits the other end via an overflow box which empties into the sump.
The greenish pump keeps the overflow box primed.

02-20-2008, 08:04 PM	#166 (permalink)
framerguy Manta Ray Join Date: Jun 2007 Location: Mount Airy, Ga Posts: 3,660 View Gallery Karma Komment Add yours!	Re: My slow 135g build Sorry, I was putting these on the other day and lost my internet service then forgot about it. Here are pics of my system . The line with the red valve is the 1" line to the sump. The line with the black valve is the 3/4" line to the fuge.The left line with the disconnect is the return. This is the line to the fuge. It enters at the far end of the fuge and... exits the other end via an overflow box which empties into the sump. The greenish pump keeps the overflow box primed. __________________ ___________________________________ Greg All time fav quote: "Now and then it's good to pause in our pursuit of happiness and just be happy."-Guillaume Apollinaire "Being happy can be as easy as deciding to be!"-Greg Kimsey (framerguy) Still Workin' on it! 375gDT built in wall, Gargantuan DIY Beckett Skimmer, 100g sump, Sequence Hammerhead closed loop, 75 gallon seagrass/mineral mud refugium, 55 gallon crushed coral/live rock refugium, 30 gallon DSB/ cheatomorpha refugium, algae turf scrubber, DIY calcium reactor, DIY kalkwasser mixer, DIY light system w/4x 250MH & 4x54w T5, etc, etc, etc... chronicles-akwareum