| Ok all, here is the one that I had for 3/4" setup.
Pictures to follow this.
I started with a 3/4 x 3/4 slip to MPT, 1/2" x 1/2" hose barb and a 1" connector slip to slip.
1: cut the slip side of the 3/4 x 3/4 off a 1/4"
2: Cut all threads off the 1/2" x 1/2" hose barb
3: Grind down the hose barb to fit inside the 3/4 threaded end of the 3/4 x 3/4 connector. (Make it a snug fit)
4: Drill 8- 5/16" holes in the 1" connector so the edge of the holes are even with the center of the connector.
5: assemble in the order of the picture.
All parts in the picture are setup in the order and way that they go together.
Hope you enjoy.
__________________
-Troy
180 gallon Reef, 3- 250 XM 15K MH Electronic ballast, 380 watts VHO Actinics, 2- 5 watt LED Moon lights, 100 gal rubbermaid sump, 75 gallon Fuge, ETSS 600 Skimmer, 4700-5400 gph pump for return, Octopus 3000 controller, Iwaki 40 RL skimmer pump, 2- 65w PC 10K fuge lights, 2 55 gallon barrels, Custom light oak stand and hood, misc pumps, extra 600 gallon rated tank size protein skimmer.
Purple tang, yellow tang, pacific blue tang, 2 green chromis, 1 Sand sifting star, snails, hermit crabs, 2 mated perculas, pulsing Xenia, Anenome, mushrooms, ricordia, zoanthids, kenya tree 1 1/2" tall, misc other hitchhiker stuff.
DIY is my dream... ...well OK the only way I can afford this Addiction!!
Just as the light goes on in my head... ... I break the bulb!! |