| Re: Overflow
If you are using the AGA/Oceanic overflow kits try placing a little plastic air valve on top of the hole in the standpipe and adjust the amoutn of air getting in that hole.
You may also need to play with how high you have the standpipe set. I found the higher it is the less issues I have with gurgling and such from the standpipe sucking air bubbles into the standpipe. Although you might find moving htem down will help.
FWIW we had no issues pushing 1800 gph through dual oceanic megaflows...
So maybe you'll have to dial it back a tad bit with a valve. |