[Charlie97L]

3/4 threaded bulkhead -> threaded pvc joiner -> 3/4" pvc -> 3/4" 90 degree pvc elbow

down facing 3/4" pvc

tee fitting -> 3/4" pvc -> 3/4" 90 degree pvc elbow -> flex pvc to sump

down facing (off 3rd tee) 3/4" pvc

ball valve 3/4" (for expansion to my fuge)

now, i just thought that the backup from the ball valve might be slowing it down? i'm not sure.

i'm not a pvc expert... if there's a better way to set this up... tell me! the angles might be a problem, or the flex pvc, i have NO idea.

i was going to do a durso with a tee fitting and cap with a hole drilled in it this weekend.