[Charlie97L]

Originally Posted by djpj001

Thanks for all the info. I was thinking about cutting the individual wires of my two white lights and putting an on/off switch and reconnecting the wires. But I don't how my ballasts will react to this. I don't want to blow up my ballast. Does anyone think this will work.

Thx,
Djpj

it depends on how the lamps are wired. if you have 2 sets of wires going to each lamp from the ballast, sure, but if they're daisy-chained, or wired in series, if you turn one set off, they'll all go off. be careful, anyways, that's some potent voltage.