[Stevenmi]

Sure thing....
The aquapod 12 has an additional 2 prong power lead for a second in hood fan. I used a .36 amp fan from a computer heat sink at first...down side it sounded like a jet engine, and the plug in is suppose to be for a .18 so I changed it out with one from radio shack..upside temps are staying low. I had wired it to a medusa 2 stage with a 12 volt plug but I think the controler unit is bad so I sent it back. The hood has the two plug-ins and what side you plug it into, using this method will determine when the fan runs. I have the ballast fan running whenever the atinics are on...and the "water surface fan" running whenever the dual daylight's are on.

I cut the hole in the plastic with tin snips after scribing the circle outline with the fan in place, and then attached with ss screws. Air is blowing in..

Sorry it took me so long to get back with ya...
ps...Evaporation has increased to about 3 cups a day!!

Steve