Reef Sanctuary - View Single Post

tommyp · 12-23-2003, 11:14 PM

Gots a big red gate valve on the output. I can set the foam height where ever in the riser tube. But I still am not able to get dry foam. You would think that lowering it would work but it just creates wet foam lower in the tube.

I am thinking of dropping the injector down so that it is close to the box. I dunno. It is really baffling to me. The only thing I can figure is that I am skimming everything out but I don't think that's the case? replacing the beckett with an eductor might be my next option. I put them on my return outputs and they work great.

T

12-23-2003, 11:14 PM	#5 (permalink)
tommyp Neon dottyback Join Date: Nov 2003 Location: VT Posts: 659 View Gallery Karma Komment	Gots a big red gate valve on the output. I can set the foam height where ever in the riser tube. But I still am not able to get dry foam. You would think that lowering it would work but it just creates wet foam lower in the tube. I am thinking of dropping the injector down so that it is close to the box. I dunno. It is really baffling to me. The only thing I can figure is that I am skimming everything out but I don't think that's the case? replacing the beckett with an eductor might be my next option. I put them on my return outputs and they work great. T __________________ "I think that you can start the bombs of oceanrunner. They are good bombs for a rollback." 190g (60x30x25) upgrade in progress, 90g basement sump Check it out here!