View Single Post
Old 12-23-2003, 11:06 PM   #4 (permalink)
Pro_builder
DIY Moderator
 
Pro_builder's Avatar
 
Join Date: Nov 2003
Location: Oxford, Iowa
Posts: 1,746
Ok, don't you have a Valve on the output side of the skimmer, to regulate the height of the foam?
What I am trying to get done is drop the foam height so that the foam has to rise farther to get to the cup. This will produce a dryer foam for ya.
If you are regulating the input side then slow the input to drop the foam height.
__________________
-Troy

180 gallon Reef, 3- 250 XM 15K MH Electronic ballast, 380 watts VHO Actinics, 2- 5 watt LED Moon lights, 100 gal rubbermaid sump, 75 gallon Fuge, ETSS 600 Skimmer, 4700-5400 gph pump for return, Octopus 3000 controller, Iwaki 40 RL skimmer pump, 2- 65w PC 10K fuge lights, 2 55 gallon barrels, Custom light oak stand and hood, misc pumps, extra 600 gallon rated tank size protein skimmer.
Purple tang, yellow tang, pacific blue tang, 2 green chromis, 1 Sand sifting star, snails, hermit crabs, 2 mated perculas, pulsing Xenia, Anenome, mushrooms, ricordia, zoanthids, kenya tree 1 1/2" tall, misc other hitchhiker stuff.
DIY is my dream... ...well OK the only way I can afford this Addiction!!
Just as the light goes on in my head... ... I break the bulb!!
Pro_builder is offline   Reply With Quote
Page generated in 0.18796 seconds with 8 queries