Not sure I can really get a picture of it, but I have a GenX/Mak4 under the tank that is hard plumbed out of the stand into 3/4" flexible hose that goes into a SCWD. The SCWD outputs are 3/4" PVC and are placed on the end of the tank opposite the overflow. The intake into the pump is 3/4" PVC with numerous holes drilled in it. I put a removable cap at the top so that I could fill the line to prime the pump. I put unions on both sides of the pump so that I could easily remove it and a ball valve on the output side.
Hope this is useful 
__________________
Katrina
90 Gal AGA with 2-250W 10k AB DE MH, 220W VHO, Turboflotor 1000, GEO calcium reactor, Pacific Coast chiller, DIY phosphate reactor and nilsen kalk reactor, sps, clams, zoanthids, rose BTA, ocellaris clown, 2 green mandarins, royal gramma, purple tang, sargassum trigger, flame hawkfish, coral beauty, neon dottyback, purple and blue linckia star, brittlestars, snails, snails, snails
|