Question re: algae. I just bought a RSM130d tank that was stocked...

[RedSea_New59]

with an anemone, a porcelain crab, 2 emerald crabs, several hermit crabs, a clown fish and goby. Water tests look good and all critters look good except there is now a sheen of algae on the glass and all the live rock is turning green with the algae. I have ony had it setup 5 days now. Is there anything I can do to curtail all this algar build up?

 

[Uncle99]

What are your current water parameters, lighting type and photoperiod.
Specifically what's the nitrite, nitrate, phosphate readings of your water?

 

[DaveK]

I have posted this many times before, but it's a good time to post it again. It's a summary of what you need to do for algae control.

DaveK's Standard Lecture #2 - Algae Control

Algae control comes down to controlling nitrates and phosphates. If you have a problem with algae it is because these two nutrients are out of control. Do not think that just because your test kits read zero or low values that you do not have a problem. In many cases the algae is removing the nutrients and growing. This is why there is a problem.

Here are possible sources of nitrates and phosphates -

Feeding, especially flake food and not rinsing frozen foods before feeding.
Using tap water to mix salt. Always use RO/DI water for this.
"Dirt traps" and "nitrate factories" in the system.
Low quality carbon can leach nutrients.
Low quality salt can sometimes add nutrients. This is unusual today.
Livestock load on the system

Here are possible ways to remove nitrates and phosphates -

Water changes. Change 1/2 the water and you reduce the nutrients by 1/2.
Skimming. Remove the waste products before the biological filtration need to break then down.
Nitrate and phosphate removal products.
Deep sand beds.
Refugiums.
Algae Scrubbers.

Each of these has advantages and disadvantages. Most people that control algae will use many of the above methods.

There are also other items that can effect algae growth rates.

Good clean up crew.
Other livestock that eats algae.
Low general water quality, especially when the readings are off.
Lighting, sometimes you can reduce it, especially in FO or FOWLR systems.
Old light bulbs. Colors change as they age and this can be a factor.
Water flow. More flow will often help keep algae down.
Manual removal. Very important, especially when there is a big problem.

 

[Uncle99]

I have followed Daves Stanadard Lectures before, worked great, for me.

 

[Pat24601]

I have followed Daves Stanadard Lectures before, worked great, for me.

I have posted this many times before, but it's a good time to post it again. It's a summary of what you need to do for algae control.

DaveK's Standard Lecture #2 - Algae Control

Algae control comes down to controlling nitrates and phosphates. If you have a problem with algae it is because these two nutrients are out of control. Do not think that just because your test kits read zero or low values that you do not have a problem. In many cases the algae is removing the nutrients and growing. This is why there is a problem.

Here are possible sources of nitrates and phosphates -

Feeding, especially flake food and not rinsing frozen foods before feeding.
Using tap water to mix salt. Always use RO/DI water for this.
"Dirt traps" and "nitrate factories" in the system.
Low quality carbon can leach nutrients.
Low quality salt can sometimes add nutrients. This is unusual today.
Livestock load on the system

Here are possible ways to remove nitrates and phosphates -

Water changes. Change 1/2 the water and you reduce the nutrients by 1/2.
Skimming. Remove the waste products before the biological filtration need to break then down.
Nitrate and phosphate removal products.
Deep sand beds.
Refugiums.
Algae Scrubbers.

Each of these has advantages and disadvantages. Most people that control algae will use many of the above methods.

There are also other items that can effect algae growth rates.

Good clean up crew.
Other livestock that eats algae.
Low general water quality, especially when the readings are off.
Lighting, sometimes you can reduce it, especially in FO or FOWLR systems.
Old light bulbs. Colors change as they age and this can be a factor.
Water flow. More flow will often help keep algae down.
Manual removal. Very important, especially when there is a big problem.

I agree with both of you. I almost answered this post and then I figured I’d wait and see if @DaveK posted his great, standard response.