MAD RED SEA MAX 130 aqueon sump and nanobox leds

th3star

New Member
Hello Folks...

I have a RSM 130 with a sump. I am trying to get the return directly into the display tank and have some questions. Right now it goes into the second chamber in the back. I feel like most of it then goes directly back into the overflow and then back to the sump which defeats the purpose of the sump.

If I change this will it mess up the balance of water in the DT vs the sump?

Anyone know where I can buy this piece? or suggestions for something else that might work?

58c981b98f7f8_redseamaxreturnarrow.thumb.jpg.901bb539aacf22a9a64240fb47677f1d.jpg

I want it to replace this right angle piece right here.

58c9866994591_MADREDSEAMAXRETURN.jpg.1b3ded5676d5950b42409014994b0b66.jpg

If I could find a straight locking nut and add a few inches of tube I could redirect right into the DT.

Thanks!
 
Last edited:

th3star

New Member
Thanks for the reply and link. I forgot to mention in the OP that the back connectors are screw on. The others that are in the tank are sort of a locking nut. So the exact piece that I am pointing to will not work. I need a straight one that looks like that but it's a locking nut instead of a threaded nut.

Sent from my Nexus 6 using Tapatalk
 
Top