danny254
Member
This is my 90g 48*18*24
DSB- silica and aragonite sand
~130 lbs of LR
Lighting- 2 250w DEMH lighting 10k ushio on Icecap ballasts.
Circulation- Mak4 main pump, returns into 4 seperate small flare nozzles (the loc-line ones) and 2 maxijet 1200 powerheads on a natural wave timer.
Water changes- I try every two weeks, but in reality averages three weeks, that is going to change soon with Reef crystals or Instant ocean salt. The salts are the same...
Sump/refugium- 40g breeder.
Topoff water- from a 3 stage RO unit.
Temperature control- CSL 1/5 hp dropinstyle chiller and a 250w titanium heater both on a Medusa dual-stage controller, kept about 80 degrees.
Skimmer- aquaC ev-120 mag5 pump.
Calcium/Alk- b-ionic, almost done making Ca reactor though.
Other additives- none
_________________________________
Corals- Mostly SPS
but a few mushroom type species, Sarcophyton, Plerogyra sp. GSP, and Zoanthids
DSB- silica and aragonite sand
~130 lbs of LR
Lighting- 2 250w DEMH lighting 10k ushio on Icecap ballasts.
Circulation- Mak4 main pump, returns into 4 seperate small flare nozzles (the loc-line ones) and 2 maxijet 1200 powerheads on a natural wave timer.
Water changes- I try every two weeks, but in reality averages three weeks, that is going to change soon with Reef crystals or Instant ocean salt. The salts are the same...
Sump/refugium- 40g breeder.
Topoff water- from a 3 stage RO unit.
Temperature control- CSL 1/5 hp dropinstyle chiller and a 250w titanium heater both on a Medusa dual-stage controller, kept about 80 degrees.
Skimmer- aquaC ev-120 mag5 pump.
Calcium/Alk- b-ionic, almost done making Ca reactor though.
Other additives- none
_________________________________
Corals- Mostly SPS
but a few mushroom type species, Sarcophyton, Plerogyra sp. GSP, and Zoanthids
Last edited: