650 return nozzle upgrade?

[Rob_p]

I see the great 3D printed options for the reefer but is there anything for the max series? The return current is just too strong shot in a single direction and would like to split it. On my RSM 250 I ended up using a wide mouth fitting but it's didn't look the greatest.

 

[Nobbygas]

I'd be interested in this. I agree that the strength of the return is strong, and the tank may well benefit from splitting the return. The only concern would be back-pressure on the Return Pump itself.

 

[Rob_p]

Back pressure if anything helps stabilize pumps and prevents cavitation. If you really add up the back pressure to the point where you're reducing flow so much that you prevent pump cooling then yeah that's bad news bears. I've seen where people have used a 90* elbow to be able to shoot the flow length wise. I'll try that while looking into 3D printing.